Note: Ingredients listed on restricted chemical lists
EC/CAS
238-878-4/14808-60-7
Name of the chemical
Silica, crystalline
Concentration
≥0.49-<1
EC/CAS
216-823-5/1675-54-3
Name of the chemical
2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bisoxirane
Concentration
≥10-<20
EC/CAS
262-975-0/61788-44-1
Name of the chemical
Phenol, styrenated
Concentration
≥0.49-<1
EC/CAS
271-846-8/68609-97-2
Name of the chemical
Oxirane, mono[(C12-14-alkyloxy)methyl] derivs
Concentration
≥0.1-
General Information
Revision date
2024-10-11
Product name
KERAPOXY comp.A
1.2.1 Relevant identified uses
Acid-resistant epoxy grout and adhesive for ceramic tiles
1.2.2. Uses advised against
Data not available
Emergency telephone
91.562.04.20
Icons in SDS
Company Information
company name
MAPEI Spain S.A.
e-mail address of the competent person responsible for the Safety Data Sheet
sicurezza@mapei.it
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H412
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
Adverse physicochemical, human health and environmental effects
No other hazards
Hazard statements
H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H412 Harmful to aquatic life with long lasting effects.
Precautionary statements
P261 Avoid breathing mist/vapours/spray. P264 Wash skin thoroughly after handling. P273 Avoid release to the environment. P280 Wear protective gloves/clothing and eye/face protection. P333+P313 If skin irritation or rash occurs: Get medical advice/attention. P337+P313 If eye irritation persists: Get medical advice/attention.
Special Provisions
EUH205 Contains epoxy constituents. May produce an allergic reaction. EUH211 Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.
Contains
Print date 11/10/2024 Production Name KERAPOXY comp.A Page n. 1 of Reaction mass of Bis(1,2,2,6,6- pentamethyl-4-piperidyl) sebacate and Methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate bis-[4-(2,3-epoxipropoxi)phenyl]propane Formaldehyde, oligomeric reaction products with 1-chloro-2,3-epoxypropane and phenol oxirane, mono[(C12-14-alkyloxy)methyl] derivs.
Annex XVII - Restrictions on the manufacture, placing on the market and use of certain dangerous substances, mixtures and articles
None.
2.3 Other hazards
No PBT, vPvB or endocrine disruptor substances present in concentration >= 0.1% No other hazards This product contains crystalline silica (quartz sand). IARC has classified crystalline silica as a Group 1 carcinogen. Both IARC and NTP consider silica as a known human carcinogen. Evidence is based on the chronic and long-term exposure workers have had to respirable sized crystalline silica dust particles. Because this product is in liquid or paste form, it does not pose a dust hazard; therefore, this classification is not relevant. (Note: sanding of the hardened product may create a silica dust hazard) This preparation contains low molecular weight epoxy resins. Cross sensitisation to other epoxies is possible. Avoid also exposure to spray mist and vapour.
