Note: Ingredients listed on restricted chemical lists
EC/CAS
238-878-4/14808-60-7
Name of the chemical
Silica, crystalline
Concentration
25-50 %
EC/CAS
236-675-5/13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
2.5-5% 00-2 00-2
General Information
Revision date
2022-03-12
Product name
ELASTOCOLOR TEXTURE
1.2.1 Relevant identified uses
Acrylic paint
supplier name
MAPEI INC (Canada)
Emergency telephone
1(800) 424-9300 / 1, (703) 527-3887, 1-613-996-6666
Icons in SDS
Company Information
company name
MAPEI INC (Canada)
e-mail address of the competent person responsible for the Safety Data Sheet
RDProductSafety@mapei.com
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
No specific hazards are encountered under normal product use.
Precautionary statements
P202 Do not handle until all safety precautions have been read and understood. P261 Avoid breathing mist/vapours/spray. P264 Wash skin thoroughly after handling. P280 Wear protective gloves and eye protection. P501 Dispose of contents/container in accordance with applicable regulations.
2.3 Other hazards
None
Ingredient(s) with unknown acute toxicity
None This product contains crystalline silica (quartz sand). IARC has classified crystalline silica as a Group 1 carcinogen. Both IARC and NTP consider silica as a known human carcinogen. Evidence is based on the chronic and long-term exposure workers have had to respirable sized crystalline silica dust particles. Because this product is in liquid or paste form, it does not pose a dust hazard; therefore, this classification is not relevant. (Note: sanding of the hardened product may create a silica dust hazard) This product contains titanium dioxide which IARC has classified as a Group 2B carcinogen (possibly carcinogenic to humans). Evidence is based on sufficient animal testing as a result of long-term inhalation at high concentrations of respirable amounts of titanium dioxide. Because this product is in liquid or paste form, it does not pose a dust hazard; therefore, this classification is not relevant. (Note: sanding of the hardened product may create a dust hazard)
