PLANIPATCH NA

MAPEI CORP

Revision date : 2025-09-24

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS05 GHS07 GHS08
Health risk rating 5
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

238-878-4/14808-60-7

Name of the chemical

Silica, crystalline

Concentration

≥3-<5%

General Information

Revision date

2025-09-24

Product name

PLANIPATCH NA

1.2.1 Relevant identified uses

Cement based levelling mortar

Emergency telephone

1(800) 424-9300 / 1, (703) 527-3887, 1-613-996-6666

Icons in SDS

GHS05 GHS07 GHS08

Company Information

company name

MAPEI CORP

e-mail address of the competent person responsible for the Safety Data Sheet

RDProductSafety@mapei.com

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H314, H317, H318, H350, H372

Hazard statements

Code

Statements

H314

Causes severe skin burns and eye damage

Section 2

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture

Skin corrosion, Category 1A Causes severe skin burns and eye damage. Serious eye damage, Category 1 Causes serious eye damage. Skin Sensitization, Category 1 May cause an allergic skin reaction. Carcinogenicity, Category 1A May cause cancer if inhaled. Specific target organ toxicity following repeated exposure, Causes damage to organs through prolonged or repeated exposure if Category 1 inhaled.

2.2 Label elements

Hazard pictograms and Signal Word Danger

Hazard statements

H314 Causes severe skin burns and eye damage. H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H350 May cause cancer if inhaled. H372 Causes damage to organs through prolonged or repeated exposure if inhaled.

Precautionary statements

P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P260 Do not breathe dust. P264 Wash skin thoroughly after handling. P270 Do not eat, drink or smoke when using this product. P280 Wear protective gloves/clothing and eye/face protection. P301+P330+P33 1 IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P302+P352 IF ON SKIN: Wash with plenty of water. P303+P361+P35 3 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P33 8 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308+P313 IF exposed or concerned: Get medical advice/attention. P310 Immediately call a doctor. P333+P313 If skin irritation or rash occurs: Get medical advice/attention. P362+P364 Take off contaminated clothing and wash it before reuse. P501 Dispose of contents/container in accordance with applicable regulations. Hazards associated with foreseeable chemical reactions None

Ingredient(s) with unknown acute toxicity

None Hazards not otherwise classified identified during the classification process: None Prolonged exposition and/or intensive inhalation of respirable free crystalline silica (average diameter less than 10 micron in accordance with ACGIH) can cause pulmonary fibrosis commonly referred to as silicosis. This preparation contains cement. Contact between cement and body fluids (e.g. sweat and eye fluids) may cause irritation or burns.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.