Note: Ingredients listed on restricted chemical lists
EC/CAS
238-878-4/14808-60-7
Name of the chemical
Silica, crystalline
Concentration
50-75%
EC/CAS
216-823-5/1675-54-3
Name of the chemical
2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bisoxirane
Concentration
10-20% 99-8
EC/CAS
236-675-5/13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
5-10%
EC/CAS
271-846-8/68609-97-2
Name of the chemical
Oxirane, mono[(C12-14-alkyloxy)methyl] derivs
Concentration
5-10%
General Information
Revision date
2025-01-08
Product name
KERAPOXY CQ PART A
1.2.1 Relevant identified uses
Epoxy grout
Emergency telephone
1(800) 424-9300 / 1, (703) 527-3887, 1-613-996-6666
Icons in SDS
Company Information
company name
MAPEI CORP
e-mail address of the competent person responsible for the Safety Data Sheet
RDProductSafety@mapei.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H360FD, H402, H412
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
Skin irritation, Category 2 Causes skin irritation. Eye irritation, Category 2A Causes serious eye irritation. Skin Sensitization, Category 1B May cause an allergic skin reaction. Reproductive toxicity, Category 1B May damage fertility. May damage the unborn child. Acute aquatic hazard, category 3 Harmful to aquatic life Chronic (long term) aquatic hazard, category 3 Harmful to aquatic life with long lasting effects.
Long term hazards
aquatic hazard, category 3 Harmful to aquatic life with long lasting effects
2.2 Label elements
Hazard pictograms and Signal Word Danger
Hazard statements
H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H360FD May damage fertility. May damage the unborn child. H402 Harmful to aquatic life H412 Harmful to aquatic life with long lasting effects.
Precautionary statements
P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P260 Do not breathe mist/vapours/spray. P264 Wash skin thoroughly after handling. P270 Do not eat, drink or smoke when using this product. P273 Avoid release to the environment. P280 Wear protective gloves/protective clothing/eye protection/face protection. P302+P352 IF ON SKIN: Wash with plenty of water. Print date 01/08/2025 Production Name KERAPOXY CQ PART A Page n. 1 of 11 P305+P351+P33 8 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308+P313 IF exposed or concerned: Get medical advice/attention. P314 Get medical advice/attention if you feel unwell. P333+P313 If skin irritation or rash occurs: Get medical advice/attention. P337+P313 If eye irritation persists: Get medical advice/attention. P362+P364 Take off contaminated clothing and wash it before reuse. P501 Dispose of contents/container in accordance with applicable regulations.
Ingredient(s) with unknown acute toxicity
None Hazards not otherwise classified identified during the classification process: None This product contains crystalline silica (quartz sand). IARC has classified crystalline silica as a Group 1 carcinogen. Both IARC and NTP consider silica as a known human carcinogen. Evidence is based on the chronic and long-term exposure workers have had to respirable sized crystalline silica dust particles. Because this product is in liquid or paste form, it does not pose a dust hazard; therefore, this classification is not relevant. (Note: sanding of the hardened product may create a silica dust hazard) This product contains titanium dioxide which IARC has classified as a Group 2B carcinogen (possibly carcinogenic to humans). Evidence is based on sufficient animal testing as a result of long-term inhalation at high concentrations of respirable amounts of titanium dioxide. Because this product is in liquid or paste form, it does not pose a dust hazard; therefore, this classification is not relevant. (Note: sanding of the hardened product may create a dust hazard)