Aftershock

SECTION 2: Hazards identification

Dust” in Section 2) which may be present at hazardous levels only during the Emergency Overview: sanding or abrading of the dried film. If no specific dusts are listed in Section 2, the applicable limits for nuisance dusts are ACGIH TLV 10 mg/m3 (total dust), 3 mg/

Product definition

This product is a pigmented liquid m3 (respirable fraction)

Health hazards

fraction). Eyes: May cause slight irritation. Work Hygienic Practices: Avoid contact with skin. Do not get in eyes. Do not take Skin: Substance may cause slight skin irritation. internally. Avoid breathing vapors or spray mists. Inhalation: May cause irritation of respiratory tract. Ventilation: Use in well-ventilated areas. General exhaust acceptable if the Ingestion: Ingestion may cause gastrointestinal irritation, nausea, and vomitting. exposure to materials in Section 2 is maintained below applicable exposure limits. Flammability Hazards: This product is not flammable. If this product is involved Refer to

Environmental hazards

Although release of this product to the environment is When sanding or abrading the dried film, wear a dust/mist respirator approved not expected to cause significant adverse effect, all releases should be avoided. by NIOSH/MSHA for dust which may be generated from this product, underlying paint, or the abrasive. Eye Protection: Use approved safety eyewear including side shields, chemical