General Information
Product name
BM SELF XL
Icons in SDS
Company Information
company name
Manufactured & Supplied by Bitumag Industries Pvt ltd
e-mail address of the competent person responsible for the Safety Data Sheet
info@bitumag.co.in
Section 2
SECTION 2: Hazards identification
Chemical Composition Wt% CAS No. Bitumen 75-85 8052-42-4 Polymer (SBS) 8 -11 9003-55-8 Base Oil 3 - 8 64742-04-7 Resin 3 - 5 64742-16-1 HDPE Film 6 - 12 N/A Polyethylene Release film < 2 N/A 3.Physical & Chemical Properties: Color Top HDPE surfaced and bottom release films Boiling Point , °C > 300. Melting point, °C > 100. Flash Point,°C N/A. Auto ignition, °C N/A. Burning rate Not established. Specific Gravity @ 25°C 1.02 – 1.10. Solubility in H₂0 N/A. Ph Value N/A. VOC Nil 4.Potential Hazards: Inhalation In case of excessive exposure to fumes, irritation of respiratory tract, congestion & coughing may occur. Skin contact Temporary itching & redness may occur. Ingestion If, swallowed, irritation of gastrointestinal tract may occur. Page | 1 5.First Aid Measures: Eye contact Do not rub or scratch. Wash eyes with plenty of clean cold water for Several minutes. If, further irritation persists, seek medical help. Skin contact Wash affected area with plenty of clean water and Soap. If, irritation persist seek medical help. Inhalation Move affected person to fresh air. Drink water to clean throat & blow nose to Remove dust. Seek medical help without any delay. Ingestion If, Swallowed obtain immediate medical help. 6.Fire Fighting Measures: Fire extinguishers used Foam/CO₂/DCP. Emits CO,CO₂, Carbon particles. Other pertinent details During burning, emits thick black smoke. Use gas mask to protect respiratory system While firefighting. 7.Accidental Release Measures Environmental precautions Wastes are not hazardous as defined by the resource & conservation and recovery Act. Containment information Vacuum dust. If, sweeping is needed, sprinkle water to suppress the dust. Do not dry Sweep dust accumulation to avoid spreading with air. 8.Exposure & Controls / Personal Protection: Personal Protective Equipment Respiratory protection Use Or-nasal respirator if products required in confined spaces. Eye protection Safety Goggles with side shields. Skin protection Impervious gloves. Industrial Hygiene Wash hands before starting & after finishing work. 9. Handling & Storage
Storage
Store in Shaded areas and away from direct sun light. Handling No health hazards associated with normal usage. Use protective tools such as Gloves and goggles while handling to avoid injury. 10. Toxicity: Non-toxic product. Page | 2 11. Ecological Effects: Mobility Non mobile solid. Bio-accumulative potential Data not available. Eco-toxicity Data not available. Acute toxicity Data not available.
Disposal
Waste disposal shall be done with local govt. approved agencies. 13. Transport: This product is classified as non Hazardous 14. Stability and Reactivity: Stability Stable. Chemical stability Avoid direct exposure to very high flame or solvent or heat. Incompatibility Strong solvents, strong acids, strong alkalis and oxidizing agents. Hazardous decomposition Decomposition mainly from ageing & burning of the products. These Decomposition may include CO, CO₂, Carbon particles and hydrocarbons. 15. Regulations: Symbol Non-flammable Labeling N/A. R.Phrase(s) S.Phrase(s) S36/37/39 Wear suitable protective clothing, goggles and gloves 16. Other Pertinent information: Please Contact TECHNICAL MANAGER Tel: +91 9059700007 The above data are based on our present knowledge. However, they shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. Page | 3