Note: Ingredients listed on restricted chemical lists
EC/CAS
90989-38-1
Name of the chemical
Aromatic hydrocarbons, C8
Concentration
N/A
EC/CAS
292-694-9
Name of the chemical
Aromatic hydrocarbons, C8
Concentration
N/A
General Information
Revision date
2012-10-09
Product name
2 PACK EPOXY FINISH PART B HARDENER
1.2.1 Relevant identified uses
A solvent-borne, liquid hardener for industrial and professional use. Application is by manual spray, brush and roller after mixing with 2 Pack Epoxy Finish Base Part A. Read product data sheet and label before use
supplier name
Manor Coating Systems Ltd
Emergency telephone
01274 587351 (Office hours only
Icons in SDS
Company Information
company name
Manor Coating Systems Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
chiefchemist@manorcoatingsystems.co.uk
Section 2
Classification (DPD)
Xn;R20/22, R48/20. Xi;R37/38, R41. R10.
Contains
BUTANOL-norm AROMATIC HYDROCARBONS, C8 (XYLENE MIXTURE) TRIETHYLENETETRAMINE. May produce an allergic reaction
2.2 Label elements
Harmful
Hazard statements
R10 Flammable. R20/22 Harmful by inhalation and if swallowed. R37/38 Irritating to respiratory system and skin. R41 Risk of serious damage to eyes. R48/20 Harmful: danger of serious damage to health by prolonged exposure through inhalation.
Precautionary statements
S23 Do not breathe vapour/spray. S24/25 Avoid contact with skin and eyes. S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 Wear suitable protective clothing, gloves and eye/face protection. S38 In case of insufficient ventilation, wear suitable respiratory equipment. P14
2.3 Other hazards
This product does not contain any PBT or vPvB substances.
