MICRORAS SB PLUS

MALVIN s.r.l

Revision date : 2010-03-01

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
Health risk rating 1
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

14808-60-7

Name of the chemical

Silica, crystalline

Concentration

N/A

EC/CAS

12001-26-2

Name of the chemical

mica

Concentration

N/A

EC/CAS

215-279-6

Name of the chemical

Calcium carbonate

Concentration

N/A

General Information

Revision date

2010-03-01

Product name

MICRORAS SB PLUS

Chemical name

not applicable because it is multi-constituent substances of inorganic origin

1.2.1 Relevant identified uses

and uses advised against Internal skim coating

supplier name

MALVIN s.r.l

Icons in SDS

Company Information

company name

MALVIN s.r.l

e-mail address of the competent person responsible for the Safety Data Sheet

ufficiotecnico@malvinsrl.com

Section 2

CLP CLASSIFICATION

2.1. Classification of the substance or of the mix Council Directive 67/548/CE, 99/45/CE and subsequent amendments: The product, in accordance with Directive 1999/45/CE, is not dangerous. Regulatory criteria EC 1272/2008 (CLP): Substance or mix not dangerous in accordance with regulation (EC) N. 1272/2008 2.2. Labeling elements in accordance with the Directive (67/548/EEC - 1999/45) Not applicable Labeling elements in accordance with regulation (EU) 1272/2008 Not applicable

2.3 Other hazards

W h e n m xi e d w ti h w a t e ,r t sih m a t e lair h a r d e n s a n d b e c o m e s v e r y h o ,t s o m e it m e s ni a f a ts w a .y Never attempt to use this material to cast body parts. Failure to observe these instructions may cause severe burns that may request a surgical removal of the damaged tissues or limb amputation. Non si prevedere questo prodotto produca rischi inconsueti durante il normale utilizzo. However, during the handling of the product not mixed and the sanding is released dust into the atmosphere. Exposure to high dust levels may cause irritation of skin, eyes, nose, throat or upper respiratory tract. In case of excessive inhalation may occur difficulty in breathing. Ensure adequate ventilation and avoid the inhalation of excessive dust. In case of insufficient ventilation, wear suitable respiratory equipment, for example a dust mask (EN 149) or a respirator with filter (EN 143). During normal use of this product is not expected an exposure to crystalline silica; however, effective levels must be determined by hygiene test of the work place. The percentage by weight of crystalline silica were not measured in this product.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.