BML184

SECTION 2: Hazards identification

OSHA Glass Beads or Zirconia- Glass Ceramic Blend or Zirconia-Silica Beads or Zirconia or Zirconia Beads Material or Component: None Lamp Phosphor Emergency Overview: No hazardous product as specified

Potential health effects

No information available Inhalation: No information available Eye Contact: No Information available Skin Contact: No Information available Ingestion: No Information available Inhalation: Causes irritation of the respiratory tract, experienced as nasal discomfort and discharge with chest pain and coughing. Headache nausea and vomiting may occur. Eye Contact: No Excess redness and swelling of the conjunctiva may occur. Causes irritation, experienced as stinging and discomfort or pain. Skin Contact: May causes slight irritation with discomfort and local redness. Prolonged contact causes mild to moderate local redness and swelling. Ingestion: May cause headache, nausea, vomiting, dizziness, and weakness. Possible kidney damage may result from ingestion of large quantities of material. 1 CONTINUED: SECTION 2. HAZARD IDENTIFICATION

Environmental effects

No information available Emitter Slurry Emergency Overview: This product is classified as Highly flammable. No information available. DR48 -1001-PGSH The additives in this product are bound in a thermoplastic resin matrix. In accordance with GHS for the classification of the product, the hazard potential may be assessed with respect to the physico-chemical form and/or bioavailability of the individual components in the thermoplastic resin. Where GHS classifications are shown below, these are based on the individual components in the thermoplastic resin matrix. Under the typical use conditions for the resin, these hazardous components are unlikely to contribute to workplace exposure. Please read the entire safety data sheet and/or consult an EHS professional for a complete understanding. Globally Harmonized System, UN(GHS) • Classification

Hazard categories

Not Hazardous: Not classified

Principle Routes of Exposure

mechanistic information and metabolism studies are pertinent to determining the relevance of an effect in humans (GHS section 1.3.2.4.9.4). Where appropriate, GHS classification can be specified as route-dependent. The size distribution of the pellets containing the Antimony Trioxide eliminates the carcinogenicity hazard potential from Antimony Trioxide. This is the case because carcinogenicity of Antimony Trioxide has only been observed in animal studies under conditions that can lead to pulmonary overload.

2.2 Label elements

GHS Labeling not required

Hazard statements

Suspected of causing cancer via inhalation

Precautionary statements

No GHS specific Precautionary Statements required -observe all other warnings and handling instructions in this MSDS.

Other hazards which do not result in classification

SABIC Emergency Overview:  Pellets with slight or no odor  Spilled material may create slipping hazard  Can burn in a fire creating dense, toxic smoke  Molten plastic can cause severe thermal burns  Fumes produced during melt processing may cause eye, skin, and respiratory tract irritation. Severe over-exposure may result in nausea, headache, chills, and fever. See below for additional effects.  Secondary operations, such as grinding, sanding, or sawing can produce dust which may present an explosion or respiratory hazard.

Further information

OSHA, IARC and/or NTP have listed carbon, titanium dioxide, crystalline silica (quartz), respirable glass and certain heavy metals, present in some colorants and fillers, as carcinogens. If these materials are present in this product at significant quantities, they are shown in Section 2/3. These materials are essentially bound to the plastic matrix and are unlikely to contribute to workplace exposure under recommended processing conditions. Processing Issues: Processing vapors may cause irritation to the eyes, skin, and respiratory tract. In cases of severe exposure, nausea and headache can also occur. Grease like processing vapor condensates on ventilation ductwork, molds, and other surfaces can cause irritation and injury to skin.

Medical Conditions Generally Aggravated by Exposure

MEDICAL RESTRICTIONS: There are no known health effects aggravated by exposure to this product. However, certain sensitive individuals and individuals with respiratory impairments may be affected by exposure to components in the processing vapors. 2