SHAMPOO BASE

SECTION 2: Hazards identification

Classification under CLP Classification of the substance or mixture Classification under CLP This product has no classification under CLP

Precautionary statements

P280: Wear {{{0|||message=protective clothing|||default=protective gloves/protective clothing/eye protection/face protection|||filter=(_)?P280_PROT_EQUIPMENT_.+}}}. P305+P351+P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

PBT Substances

This product is not identified as a PBT/vPvB substance.

2.1 Classification of the substance or mixture

Classification under CLP: This product has no classification under CLP. 2.2. Label elements Label elements: Precautionary statements: P280: Wear {{{0|||message=protective clothing|||default=protective gloves/protective clothing/eye protection/face protection|||filter=(_)?P280_PROT_EQUIPMENT_.+}}}. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. 2.3. Other hazards PBT: This product is not identified as a PBT/vPvB substance. Section 3: Composition/information on ingredients 3.2. Mixtures Hazardous ingredients: SODIUM LAUROYL METHYL ISETHIONATE - REACH registered number(s): 01-2119401252-59 EINECS CAS PBT / WEL CLP Classification Percent 700-150-3 928663-45-0 - Eye Irrit. 2: H319 5-20% COCAMIDOPROPYL BETAINE - REACH registered number(s): 01-2119488533-30-0001 263-058-8 61789-40-0 - Aquatic Chronic 3: H412; Eye Dam. 1: 2-5% H318 LAURYL GLUCOSIDE - REACH registered number(s): 01-2119499418-23 - 110615-47-9 - Skin Irrit. 2: H315; Eye Dam. 1: H318 2-5% Section 4: First aid measures 4.1. Description of first aid measures Skin contact: Remove all contaminated clothes and footwear immediately unless stuck to skin. Wash immediately with plenty of soap and water. Eye contact: Bathe the eye with running water for 15 minutes. Transfer to hospital for specialist examination. Ingestion: Wash out mouth with water. Do not induce vomiting. If conscious, give half a litre of water to drink immediately. Consult a doctor. Inhalation: Remove casualty from exposure ensuring one's own safety whilst doing so. 4.2. Most important symptoms and effects, both acute and delayed Skin contact: There may be irritation and redness at the site of contact. Eye contact: There may be pain and redness. The eyes may water profusely. There may be severe pain. The vision may become blurred. May cause permanent damage. Ingestion: There may be soreness and redness of the mouth and throat. Nausea and stomach pain may occur. Inhalation: There may be irritation of the throat with a feeling of tightness in the chest. Delayed / immediate effects: Immediate effects can be expected after short-term exposure. 4.3. Indication of any immediate medical attention and special treatment needed Immediate / special treatment: Eye bathing equipment should be available on the premises. Section 5: Fire-fighting measures 5.1. Extinguishing media Extinguishing media: Suitable extinguishing media for the surrounding fire should be used. Use water spray to cool containers. 5.2. Special hazards arising from the substance or mixture Exposure hazards: In combustion emits toxic fumes. 5.3. Advice for fire-fighters Advice for fire-fighters: Wear self-contained breathing apparatus. Wear protective clothing to prevent contact with skin and eyes. Section 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Personal precautions: Mark out the contaminated area with signs and prevent access to unauthorised personnel. Do not attempt to take action without suitable protective clothing - see section 8 of SDS. Turn leaking containers leak-side up to prevent the escape of liquid. 6.2. Environmental precautions Environmental precautions: Do not discharge into drains or rivers. Contain the spillage using bunding. 6.3. Methods and material for containment and cleaning up Clean-up procedures: Absorb into dry earth or sand. Transfer to a closable, labelled salvage container for disposal by an appropriate method. 6.4. Reference to other sections Reference to other sections: Refer to section 8 of SDS. Section 7: Handling and storage 7.1. Precautions for safe handling Handling requirements: Avoid direct contact with the substance. Ensure there is sufficient ventilation of the area. Avoid the formation or spread of mists in the air. 7.2. Conditions for safe storage, including any incompatibilities Storage conditions: Store in a cool, well ventilated area. Keep container tightly closed. Suitable packaging: Must only be kept in original packaging. 7.3. Specific end use(s) Specific end use(s): No data available. Section 8: Exposure controls/personal protection 8.1. Control parameters Workplace exposure limits: No data available. DNEL/PNEC Values DNEL / PNEC No data available. 8.2. Exposure controls Engineering measures: Ensure there is sufficient ventilation of the area. Respiratory protection: Self-contained breathing apparatus must be available in case of emergency. Hand protection: Protective gloves. Eye protection: Tightly fitting safety goggles. Ensure eye bath is to hand. Skin protection: Protective clothing. Environmental: An environmental assessment must be made to ensure compliance with local environmental legislation. Section 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties State: Liquid Colour: Colourless Odour: Odourless Viscosity: Viscous pH: 5-6 9.2. Other information Other information: No data available. Section 10: Stability and reactivity 10.1. Reactivity Reactivity: Stable under recommended transport or storage conditions. 10.2. Chemical stability Chemical stability: Stable under normal conditions. 10.3. Possibility of hazardous reactions Hazardous reactions: Hazardous reactions will not occur under normal transport or storage conditions. Decomposition may occur on exposure to conditions or materials listed below. 10.4. Conditions to avoid Conditions to avoid: Heat. 10.5. Incompatible materials Materials to avoid: Strong oxidising agents. Strong acids. 10.6. Hazardous decomposition products Haz. decomp. products: In combustion emits toxic fumes. Section 11: Toxicological information 11.1. Information on toxicological effects Hazardous ingredients: SODIUM LAUROYL METHYL ISETHIONATE DERMAL RAT LD50 >2000 mg/kg ORAL RAT LD50 8400 mg/kg COCAMIDOPROPYL BETAINE DERMAL - calculated > 5000 mg/kg ORAL RAT LD50 >2000 mg/kg ORAL RAT calculated > 5000 mg/kg LAURYL GLUCOSIDE DERMAL RAT LD50 >5000 mg/kg ORAL RAT LD50 >5000 mg/kg Toxicity values: No data available. Symptoms / routes of exposure Skin contact: There may be irritation and redness at the site of contact. Eye contact: There may be pain and redness. The eyes may water profusely. There may be severe pain. The vision may become blurred. May cause permanent damage. Ingestion: There may be soreness and redness of the mouth and throat. Nausea and stomach pain may occur. Inhalation: There may be irritation of the throat with a feeling of tightness in the chest. Delayed / immediate effects: Immediate effects can be expected after short-term exposure. Section 12: Ecological information 12.1. Toxicity Hazardous ingredients: SODIUM LAUROYL METHYL ISETHIONATE ALGAE 72H ErC50 46.3 mg/l ALGAE 96H LC50 >1000 mg/l DAPHNIA 48H EC50 14.08 mg/l FISH 96H LC50 29.3 mg/l COCAMIDOPROPYL BETAINE ALGAE