Marula Oil Refined

SECTION 2: Hazards identification

(EC) No 1272/2008 CLASSIFICATION OF THE SUBSTANCE OR MIXTURE CLASSIFICATION (EC 1272/2008) Not classified as hazardous

Signal word

None

Hazard statements

None PRECAUTIONARY STATEMENTS AND/OR SUPPLEMENTARY STATEMENTS None

Supplemental label elements

None

Potential Acute Health Effects

No additional data ADVERSE PHYSIO-CHEMICAL PROPERTIES No additional data

2.1 Classification of the substance or mixture

CLASSIFICATION (EC 1272/2008) Not classified as hazardous. 2.2 LABEL ELEMENTS LABEL IN ACCORDANCE WITH (EC) NO 1272/2008 None SIGNAL WORD None HAZARD STATEMENTS None PRECAUTIONARY STATEMENTS AND/OR SUPPLEMENTARY STATEMENTS None SUPPLEMENTARY STATEMENTS None 2.3 OTHER HAZARDS ADVERSE EFFECTS ON HUMAN HEALTH No additional data ADVERSE PHYSIO-CHEMICAL PROPERTIES No additional data 03. COMPOSITION/INFORMATION ON INGREDIENTS 3.1/3.2 SUBSTANCES/MIXTURES No additional data 04. FIRST AID MEASURES 4.1 DESCRIPTION OF FIRST AID MEASURES Remove to fresh air and remain in a position which is comfortable for breathing. Seek INHALATION medical attention. Do NOT induce vomiting. Ingestion may cause nausea and vomiting. Immediately rinse mouth INGESTION and provide fresh air. Seek medical attention. Remove contaminated clothing and wash before reuse. Wash skin thoroughly with soap and SKIN CONTACT water. If discomfort occurs/continues, seek medical attention. Rinse eyes with clean water for a minimum of fifteen minutes. If safe to do so, remove to EYE CONTACT contact lenses and continue to rinse. Seek medical attention. 4.2 MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED No additional data 4.3 INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDED Treat symptomatically. 05. FIREFIGHTING MEASURES 5.1 EXTINGUISHING METHODS - Carbon Dioxide - Alcohol Resistant Foam - Dry Chemical Powder Do NOT use water. 5.2 HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE This product is made up of inflammable material with low risk. The product may only form ignitable mixtures or burn only upon heating above the flash point. However, minor contamination by lightly volatile hydrocarbons may in-crease the hazard. Ignition hazard at welding at the empty container. In the event of fire this product can generate oxides of carbon and other toxic gases. A fire will often produce a thick black smoke. Exposure to decomposition products may be hazardous to health. Do not breathe in smoke. 5.3 ADVICE FOR FIREFIGHTERS Wear self-contained respiratory equipment and appropriate protective clothing at all times. Do not inhale any gases or fumes which may be generated. Containers in close proximity to fire should be removed to a safe distance and the exterior of the container cooled with water. 06. ACCIDENTAL RELEASE MEASURES 6.1 PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES Wear protective clothing as recommended at all times. Handle the product using protective gloves resistant to the chemicals exposed. Avoid contact with skin and inhalation of its vapours. Maintain adequate ventilation in the working area after spilling. 6.2 ENVIROMENTAL PRECAUTIONS Do not allow the product to enter drains or sewers, water course or the ground. Do not allow the product to enter the environment. 6.3 METHODS AND MATERIALS FOR CONTAINMENT AND CLEANING UP THIS PRODUCT Cover with an inert, inorganic, non-combustible absorbent material (e.g. dry-lime, sand, soda ash). Place in covered containers and dispose of in accordance with current laws and regulations. If Spillage on water occurs; Confine the spill immediately with booms. Warn other ships. Notify port and other relevant authorities. Remove from the surface by skimming or with suitable absorbents. In running waters, apply appropriate dispersants in accordance with local regulation. 6.4 REFERENCE TO OTHER SECTIONS Section 13 07. EXPOSURE CONTROLS AND/OR PERSONAL PROTECTION 7.1 PRECAUTIONS FOR SAFE HANDLING Adhere to all good health, safety and hygiene practices. If handling large/heavy packages or drums, ensure the use