Note: Ingredients listed on restricted chemical lists
EC/CAS
231-639-5/7664-93-9
Name of the chemical
sulphuric acid
Concentration
51-<65%
EC/CAS
232-679-6/7772-98-7
Name of the chemical
sodium thiosulphate
Concentration
0,1-<1%
EC/CAS
7732-18-5
Name of the chemical
Water, distilled, conductivity or of similar purity H2O
Concentration
N/A
General Information
Version
M V
Revision date
2019-05-20
Product name
VISOCOLOR HE Sulfite SU 100, refill pack
REACH No
see
1.2.1 Relevant identified uses
Product for analytical use Exposure Scenario Classification according REACh, RIP 3.2 Codes: SU 0-2, PC 21, PROC 15, AC 0 The exposure scenario is integrated into sections 1-16
1.2.2. Uses advised against
not described
Manufacturer Name
MACHEREY-NAGEL GmbH & Co. KG
Emergency telephone
+49 361 730 730
Icons in SDS
Company Information
company name
MACHEREY-NAGEL GmbH & Co. KG
e-mail address of the competent person responsible for the Safety Data Sheet
sds@mn-net.com
GHS Information
Signal word
-
Hazard Codes
Hazard statements (CLP)
H314
Hazard statements
Code
Statements
H314
Causes severe skin burns and eye damage
Section 2
SECTION 2: Hazards identification
2.0 Classification of the complete product GHS05
Signal word
DANGER Hazard classes/categories H314 Skin Corr. 1A - No hazard class 30 mL Sulphite-2 GHS05 DANGER Hazard classes/categories H314 Skin Corr. 1A 10 mL Sulphite-3 Do not need labelling as hazardous - No hazard class 100 mL TL SU 100 Do not need labelling as hazardous - No hazard class - 30 mL Sulphite-2 GHS05 DANGER H314 Causes severe skin burns and eye damage. P260sh, P280sh, P303+361+353, P305+351+338, P310 Do not breathe dust/vapours. Wear protective gloves/eye protection. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor. 10 mL Sulphite-3 Do not need labelling as hazardous - 100 mL TL SU 100 Do not need labelling as hazardous -
2.1 Classification of the substance or mixture
100 mL Sulphite-1 Do not need labelling as hazardous
2.2 Label elements
According CLP directive inner packages must be only labelled with GHS symbol(s) and product identificator(s) (EU 1272/2008 Annex I - 1.5.1.2). 100 mL Sulphite-1 Do not need labelling as hazardous
2.3 Other hazards
Possible hazards from physicochemical properties Generally in the case of pH values are less than 2 or higher than 11.5 then it is corrosive. The property H314 "Causes severe skin burns and eye damage." of some salts is not applicable, because the mixture is buffered to pH >3-4 (see GHS Directive 1272/2008/EC Annex I, chapter 3.2.3.1.2.). --- Information pertaining to particular risks to human and possible symptoms Causes varying degrees of acid burns on the skin, to the eyes and to the mucous membranes and wounds which do not heal quickly depending on the concentration, temperature and the exposure time. Vapours especially which steam from hot liquids and mist can have a severe irritant effect upon the eyes and the respiratory organs. - Information pertaining to particular risks to the environment Avoid contact of substance/mixture to environment.
PBT Substances
not applicable
vPvB Substances
not applicable
Other hazards
---
