Note: Ingredients listed on restricted chemical lists
EC/CAS
200-677-4/68-11-1
Name of the chemical
Mercaptoacetic acid
Concentration
24-<40% <1,00% 45-<60%
EC/CAS
7732-18-5
Name of the chemical
Water, distilled, conductivity or of similar purity H2O
Concentration
N/A
General Information
Version
M V
Revision date
2019-05-20
Product name
VISOCOLOR ECO Iron 1, refill pack
REACH No
see
1.2.1 Relevant identified uses
Product for analytical use Exposure Scenario Classification according REACh, RIP 3.2 Codes: SU 0-2, PC 21, PROC 15, AC 0 The exposure scenario is integrated into sections 1-16
1.2.2. Uses advised against
not described
Manufacturer Name
MACHEREY-NAGEL GmbH & Co. KG
Emergency telephone
+49 361 730 730
Icons in SDS
Company Information
company name
MACHEREY-NAGEL GmbH & Co. KG
e-mail address of the competent person responsible for the Safety Data Sheet
sds@mn-net.com
GHS Information
Signal word
DANGER
Hazard Codes
Hazard statements (CLP)
H301, H311, H314, H331
Hazard statements
Code
Statements
H301
Toxic if swallowed
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
30 mL Fe-1 GHS05 GHS06
Signal word
DANGER Hazard classes/categories H301 Acute Tox. 3 oral H311 Acute Tox. 3 derm. H314 Skin Corr. 1B H331 Acute Tox. 3 inh. DANGER H301, H311, H314, H331 Toxic if swallowed. Toxic in contact with skin. Causes severe skin burns and eye damage. Toxic if inhaled. P260sh, P280sh, P301+310, P303+361+353, P305+351+338, P405 Do not breathe dust/vapours. Wear protective gloves/eye protection. IF SWALLOWED: Immediately call a POISON CENTER/ doctor. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Store locked up.
2.2 Label elements
According CLP directive inner packages must be only labelled with GHS symbol(s) and product identificator(s) (EU 1272/2008 Annex I - 1.5.1.2). 30 mL Fe-1 GHS05 GHS06
2.3 Other hazards
Possible hazards from physicochemical properties Generally in the case of pH values are less than 2 or higher than 11.5 then it is corrosive. The property H314 "Causes severe skin burns and eye damage." of some salts is not applicable, because the mixture is buffered to pH >3-4 (see GHS Directive 1272/2008/EC Annex I, chapter 3.2.3.1.2.). --- Information pertaining to particular risks to human and possible symptoms Causes varying degrees of acid burns on the skin, to the eyes and to the mucous membranes and wounds which do not heal quickly depending on the concentration, temperature and the exposure time. Vapours especially which steam from hot liquids and mist can have a severe irritant effect upon the eyes and the respiratory organs. Cause severe after oral intake, inhalation of vapours, skin contact, impairments of health or can lead to death even when only ingested in small quantities. - Information pertaining to particular risks to the environment Avoid contact of substance/mixture to environment.
PBT Substances
not applicable
vPvB Substances
not applicable
Other hazards
---
