Note: Ingredients listed on restricted chemical lists
EC/CAS
204-854-7/127-65-1
Name of the chemical
Tosylchloramide sodium
Concentration
2000-3- 45-<60% 50-<75%
EC/CAS
7732-18-5
Name of the chemical
Water, distilled, conductivity or of similar purity H2O
Concentration
N/A
General Information
Revision date
2019-05-20
Product name
NANOCOLOR Cyanide
REACH No
see
1.2.2. Uses advised against
not described
Manufacturer Name
MACHEREY-NAGEL GmbH & Co. KG
Emergency telephone
+49 361 730 730
Icons in SDS
Company Information
company name
MACHEREY-NAGEL GmbH & Co. KG
e-mail address of the competent person responsible for the Safety Data Sheet
sds@mn-net.com (m
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H225, H302, H312, H314, H332, H334
Hazard statements
Code
Statements
H225
Highly Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
2.0 Classification of the complete product GHS02 GHS05 GHS07 GHS08
Signal word
DANGER Hazard classes/categories EUH031 031 not defined H225 Flam. Liq. 2 H302 Acute Tox. 4 oral H312 Acute Tox. 4 derm. H314 Skin Corr. 1B H332 Acute Tox. 4 inh. H334 Resp. Sens. 1 DANGER Hazard classes/categories EUH031 031 not defined H302 Acute Tox. 4 oral H314 Skin Corr. 1B H334 Resp. Sens. 1 12 g Cyanide R2 Do not need labelling as hazardous - No hazard class 100 mL Cyanide R3 GHS02 GHS07 DANGER Hazard classes/categories H225 Flam. Liq. 2 H302 Acute Tox. 4 oral H312 Acute Tox. 4 derm. H332 Acute Tox. 4 inh. DANGER H314, H334 Causes severe skin burns and eye damage. May cause allergy or asthma symptoms or breathing difficulties if inhaled. P260sh, P280sh, P303+361+353, P305+351+338, P310 Do not breathe dust/vapours. Wear protective gloves/eye protection. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor. 12 g Cyanide R2 Do not need labelling as hazardous - 100 mL Cyanide R3 GHS02 GHS07 DANGER
2.1 Classification of the substance or mixture
7 g Cyanide R1 GHS05 GHS07 GHS08
2.2 Label elements
According CLP directive inner packages must be only labelled with GHS symbol(s) and product identificator(s) (EU 1272/2008 Annex I - 1.5.1.2). Harmful chemicals/mixtures with signal word: WARNING and highly flammable chemicals/mixtures must not be labelled with H and P phrases until 125 mL (EU 1272/2008 Annex I - 1.5.2). This labelling exemption is NOT valid for sensibilizing substances. 7 g Cyanide R1 GHS05 GHS07 GHS08
2.3 Other hazards
Possible hazards from physicochemical properties Generally in the case of pH values are less than 2 or higher than 11.5 then it is corrosive. Flammable properties. --- Information pertaining to particular risks to human and possible symptoms Causes varying degrees of acid burns on the skin, to the eyes and to the mucous membranes and wounds which do not heal quickly depending on the concentration, temperature and the exposure time. Vapours especially which steam from hot liquids and mist can have a severe irritant effect upon the eyes and the respiratory organs. Cause after oral intake, inhalation of vapours/dust, impairments of health when ingested in small quantities. May cause allergy or asthma symptoms or breathing difficulties if inhaled. - Information pertaining to particular risks to the environment Avoid contact of substance/mixture to environment.
PBT Substances
not applicable
vPvB Substances
not applicable
Other hazards
Contains an odor intensive reagent. ---