Note: Ingredients listed on restricted chemical lists
EC/CAS
9003-07-0
Name of the chemical
polypropylene wax
Concentration
≥95 ≤5
General Information
Version
2.0
Revision date
2017-09-15
Product name
M. Holland Company MTEGRITY™ Homopolymer Polypropylene PP###X
Product name
M. Holland Company MTEGRITY™ Homopolymer Polypropylene PP###X
Identification on the label/Trade name
Polypropylene
Product Synonyms
Polypropylene resin, 1-propene homopolymer
Chemical name
Polymer
CAS No.
9003-07-0
1.2.1 Relevant identified uses
Molded, extruded and fibrous plastic articles
supplier name
M. Holland Company
Icons in SDS
Company Information
company name
M. Holland Company
GHS Information
Signal word
CAUTION
Section 2
SECTION 2: Hazards identification
29 CFR 1910.1200) Emergency Overview: Combustible particulate solids (combustible dust) of sufficiently small particle size when suspended in air in the presence of an ignition source can result in a fire or explosion. Adequate housekeeping and control of ignition sources should be provided. See NFPA 654. Inhalation of vapors from thermal processing may cause irritation to the upper respiratory tract. Molten material may cause thermal burns. Solid particles may cause transient irritation from mechanical abrasion. This material is NOT HAZARDOUS under the criteria of the Federal
Signal word
CAUTION. Ratings Key: 0 = least, 1 = slight, 2 = moderate, 3 = high, 4 = extreme Health Fire Reactivity PPI NFPA 1 0 HMIS 0 1 0 X
Principle Routes of Exposure
Skin contact. Eye contact. Inhalation. Ingestion.
Potential health effects
Inhalation: Negligible at room temperature. Inhalation of nuisance dusts, fumes, vapors and smoke from thermal processing may cause irritation to the upper respiratory tract. Symptoms may include burning sensation, coughing and sore throat. 1 Ingestion: Ingestion is not a likely route of exposure. No effects are expected for ingestion of small amounts. May be a choking hazard. Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea. Skin: No known acute effects of this product resulting from skin contact at room temperature. Prolonged or repeated contact with dusts may be abrasive and mildly irritating to the skin. For heated polymer, skin contact can cause serious thermal burns, which may include pain or feeling of heat, discolorations, swelling and blistering. Eyes: Dust or contact with pellets may cause mechanical irritation to eye, and is not expected to cause prolonged or significant eye irritation. Eye contact with heated polymer can cause serious thermal burns or blindness. Possible irritation from fumes, vapors or smoke from thermal processing.
Potential chronic health
None known
Medical Conditions Generally Aggravated by Exposure
Respiratory disorders
