General Information
Version
1.0
Revision date
2026-08-19
Product name
M. Holland Company Mtegrity Plus 2545HFFR35NT2
1.2.1 Relevant identified uses
Injection molded plastic parts and shapes For emergency health, safety and environmental protection, call your M. Holland representative, or the M Holland o0ice at (800) 872-7370 (8 am – 5 pm Central)
supplier name
M. Holland Company, LLC
Icons in SDS
Company Information
company name
M. Holland Company, LLC
GHS Information
Signal word
None
Section 2
SECTION 2: Hazards identification
OSHA defined hazards Emergency Overview: Combustible particulate solids (combustible dust) of su0iciently small particle size when suspended in air in the presence of an ignition source can result in a fire or explosion. Adequate housekeeping and control of ignition sources should be provided. See NFPA 654. Inhalation of vapors from thermal processing may cause irritation to the upper respiratory tract. Solid particles may cause transient irritation from mechanical abrasion. Adequate room and extruder ventilation should be provided to minimize exposures.
Signal word
None.
Hazard pictograms
None.
Principle Routes of Exposure
Skin contact. Eye contact. Inhalation. Ingestion. Potential Health E2ects: Inhalation: Negligible at room temperature. Inhalation of nuisance dusts, fumes, vapors and smoke from thermal processing may cause irritation to the upper respiratory tract. Symptoms may include burning sensation, coughing and sore throat. Ingestion: Ingestion is not a likely route of exposure. No e0ects are expected for ingestion of small amounts. May be a choking hazard. Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea. Skin: No known acute e0ects of this product resulting from skin contact at room temperature. Prolonged or repeated contact with dusts may be abrasive and mildly irritating to the skin. For heated polymer, skin contact can cause serious thermal burns, which may include pain or feeling of heat, discolorations, swelling and blistering. Eyes: Dust or contact with pellets may cause mechanical irritation to eye, and is not expected to cause prolonged or significant eye irritation. Eye contact with heated polymer can cause serious thermal burns or blindness. Possible irritation from fumes, vapors or smoke from thermal processing. Chronic E2ects: Ongoing exposure may aggravate acute e0ects.
Medical Conditions Generally Aggravated by Exposure
Respiratory disorders.