Note: Ingredients listed on restricted chemical lists
EC/CAS
21645-51-2
Name of the chemical
Aluminium hydroxide
Concentration
52-62
EC/CAS
80-62-6
Name of the chemical
methacrylic acid, methyl ester
Concentration
<=1 1-5
General Information
Revision date
2020-01-17
Product name
HIMACS Sheets (Acrylic Solid Surface Material)
1.2.1 Relevant identified uses
Surface Material
1.2.2. Uses advised against
Do not fabricate the material, including grinding, buffing, chipping, sanding, drilling, polishing or other processes that generate dust prior to reading and understanding all contents of this Safety Data Sheet and the Fabrication Manual
Emergency telephone
800-255-3924
Icons in SDS
Company Information
company name
LX Hausys America, Inc
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H232, H317, H335, H350, H372
Hazard statements
Code
Statements
H232
May ignite spontaneously if exposed to air
Section 2
SECTION 2: Hazards identification
Classification of the substance or mixture Classification Comb. Dust Skin Sens. 1 Combustible dust Sensitisation — Skin, category 1 H232 May form combustible dust concentrations in air H317 May cause an allergic skin reaction H350 May cause cancer (inhalation) H372 Causes damage to lungs through prolonged or repeated exposure (inhalation) H335 May cause respiratory tract irritation
2.2 Label elements
This product meets the criteria of the Article definition and therefore is exempt from labeling under 29 CFR 1910.1200(c)
2.3 Other hazards
Hazards not otherwise identified HIMACS Solid Surface Material is not hazardous and does not pose physical hazards and/or health risks as supplied or shipped. However, operations such as sawing, routing, drilling and sanding can generate dust. High concentrations of dust can cause reversible physical irritation to eyes, nose, skin and respiratory passages and cause coughing and sneezing. Asthmatic conditions may also be aggravated by dust. Even though there are no exposure limits established for dust from HIMACS, avoid breathing dust. HIMACS Solid Surface Material does not release any gas or vapor at ambient conditions. At higher temperatures (>300°C / 572°F), small amounts of methyl methacrylate could be released; the amount released is dependent upon temperature, time and other variables. Vapor at high concentration can cause skin and respiratory irritation. Overexposure to vapor can cause headache, nausea, weakness and lung irritation with cough, discomfort and shortness of breath. Individuals with pre-existing diseases of the lungs or skin may have increased susceptibility to the effects of overexposure to methyl methacrylate.
Ingredient(s) with unknown acute toxicity
Not applicable
2.1 Classification of the substance or mixture
Classification Comb. Dust Combustible dust Skin Sens. 1 Sensitisation — Skin, category 1 H232 May form combustible dust concentrations in air H317 May cause an allergic skin reaction H350 May cause cancer (inhalation) H372 Causes damage to lungs through prolonged or repeated exposure (inhalation) H335 May cause respiratory tract irritation
