Note: Ingredients listed on restricted chemical lists
EC/CAS
238-878-4/14808-60-7
Name of the chemical
Silica, crystalline
Concentration
<8% 878-4 <7%
EC/CAS
7631-86-9
Name of the chemical
Silver adsorbed on silicon dioxide
Concentration
<0.11% 545-4
EC/CAS
231-545-4/13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
<0.1% 675-5
EC/CAS
21645-51-2
Name of the chemical
Aluminium hydroxide
Concentration
<0.09% 492-7
General Information
Revision date
2017-11-30
Product name
LP Engineered Wood Products with Fire-Retardant Coating
1.2.1 Relevant identified uses
• Various engineered wood building products with fire-retardant coatings for wall, roof, or floor components; structural or nonstructural construction components; industrial applications This SDS applies to all of LP’s products with fire retardant coatings
Manufacturer Name
Louisiana-Pacific Corporation
Icons in SDS
Company Information
company name
Louisiana-Pacific Corporation
GHS Information
Signal word
DANGER
Hazard Codes
Hazard statements (CLP)
H317, H334, H335, H350, H372, H372+H373
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
H334
May cause allergy or asthma symptoms or breathing difficulties if inhaled
H335
May cause respiratory irritation
H350
May cause cancer
H372
Causes damage to organs through prolonged or repeated exposure
Section 2
SECTION 2: Hazards identification
OSHA HCS 2012 This product is not hazardous in the form in which it is shipped by the manufacturer but health and/or physical hazards may be created by downstream activities (e.g., cutting, sanding, milling) that reduce its particle size. Those downstream hazards are described below. EU/EEC
2.2 Label elements
CLP DANGER WHMIS 2015
Hazard statements
H317 - May cause an allergic skin reaction H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled H335 - May cause respiratory irritation H350 - May cause cancer. H 372 / 373: May cause damage to lungs through prolonged or repeated exposure via inhalation May cause an allergic skin reaction May cause allergy or asthma symptoms or breathing difficulties if inhaled May cause respiratory irritation May cause cancer. May form combustible dust concentrations in air. No label element(s) required
Prevention
P202 - Do not handle until all safety precautions have been read and understood P260 - Do not breathe dust P271 - Use (saw, sand, etc.) only outdoors or in a well-ventilated area. P280 - Wear protective gloves/protective clothing/eye protection/face protection. P284/P285 - In case of inadequate ventilation wear respiratory protection. Do not handle until all safety precautions have been read and understood Avoid breathing dust. Use (saw, sand, etc.) only outdoors or in a well-ventilated area. Wear protective gloves/protective clothing/eye protection/face protection. In case of inadequate ventilation wear respiratory protection.
Response
P304+P340 - IF INHALED Remove person to fresh air and keep comfortable for breathing. P342+P311 - If experiencing respiratory symptoms: Call a POISON CENTER/doctor. P302+P352 - IF ON SKIN: Wash with plenty of water. P362+P364 - Take off contaminated clothing and wash it before reuse. P333+P313 - If skin irritation or rash occurs: Get medical advice/attention. P308+P313 - IF exposed or concerned: Get medical advice/attention. Storage/Disposal • P501 - Dispose of content and/or container in accordance with local, regional, national, and/or international regulations. IF INHALED If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. If experiencing respiratory symptoms: Call a POISON CENTER or doctor/physician. If on skin: Wash with plenty of water. Wash contaminated clothing before reuse. If skin irritation or rash occurs: Get medical advice/attention. IF exposed or concerned: Get medical advice/attention. Storage/Disposal • Dispose of content and/or container in accordance with local, regional, national, and/or international regulations.
2.3 Other hazards
CLP • May form combustible dust concentrations in air. WHMIS 2015 • Under Canadian regulations (Workplace Hazardous Materials Information System (WHMIS) - Hazardous Products Act (HPA), Section 11(1)), these product(s) are exempt and considered manufactured article(s) under stated normal conditions of use.
2.1 Classification of the substance or mixture
CLP • Skin Sensitization 1 - H317 Respiratory Sensitization 1 - H334 Specific Target Organ Toxicity Single Exposure 3: Respiratory Tract Irritation - H335 Specific Target Organ Toxicity Repeated Exposure 1: Respiratory Tract - H372 Carcinogenicity 1A - H350
Further information
• This product is not hazardous in the form in which it is shipped by the manufacturer but health and/or physical hazards may be created by downstream activities (e.g., cutting, sanding, milling) that reduce its particle size. Those hazards are described above. • This may be a treated engineered wood article which incorporates a biocidal product to control wood destroying organisms. Active Ingredient: Boric Acid. When working with this product, the following is recommended: Use (saw, sand, etc.) only outdoors in a well-ventilated area. Avoid breathing dust. In case of inadequate ventilation, wear respiratory protection. Wear appropriate PPE (gloves, eye, and face protection). Do not eat, drink or smoke when using this product. Wash thoroughly with soap and water after handling and before eating, drinking, or using tobacco. Avoid prolonged and repeated contact with the skin. Store in a protected location. Dispose of waste material in accordance with local, regional and national regulations.