Note: Ingredients listed on restricted chemical lists
EC/CAS
82657-04-3
Name of the chemical
Bifenthrin (ISO); (2-Methylbiphenyl-3-yl)methyl rel-(1R,3R)-3-[(1Z)-2-chlor-3,3,3-trifluorprop-1-en-1-yl]-2,2-dimethylcyclopropan-carboxylat (944/2013)
Concentration
<0.01% 00-7
General Information
Revision date
2017-11-30
Product name
LP Engineered Wood Products
1.2.1 Relevant identified uses
Various engineered wood building products for wall, roof, or floor components; structural or nonstructural construction components; industrial applications This SDS applies to all of LP’s wood products except those with
Manufacturer Name
Louisiana-Pacific Corporation
Icons in SDS
Company Information
company name
Louisiana-Pacific Corporation
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H317, H334, H335, H350
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
Section 2
SECTION 2: Hazards identification
WHMIS 2015 This product is not hazardous in the form in which it is shipped by the manufacturer but health and/or physical hazards may be created by downstream activities (e.g., cutting, sanding, milling) that reduce its particle size. Those downstream hazards are described below. EU/EEC According to: Regulation (EC) No 1272/2008 (CLP)/REACH 1907/2006 [amended by 2015/830]
2.1 Classification of the substance or mixture
CLP • Skin Sensitization 1 - H317 Respiratory Sensitization 1 - H334 Specific Target Organ Toxicity Single Exposure 3: Respiratory Tract Irritation - H335 Carcinogenicity 1A - H350 OSHA HCS 2012 • Skin Sensitization 1 Respiratory Sensitization 1 Specific Target Organ Toxicity Single Exposure 3: Respiratory Tract Irritation Carcinogenicity 1A Combustible Dust WHMIS 2015 • Not classified
2.2 Label elements
CLP DANGER OSHA HCS 2012 DANGER WHMIS 2015 Hazard • No label element(s) required
Hazard statements
H317 - May cause an allergic skin reaction H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled H335 - May cause respiratory irritation H350 - May cause cancer. May cause an allergic skin reaction May cause allergy or asthma symptoms or breathing difficulties if inhaled May cause respiratory irritation May cause cancer. May form combustible dust concentrations in air.
Prevention
P202 - Do not handle until all safety precautions have been read and understood P261 - Avoid breathing dust. P271 - Use (saw, sand, etc.) only outdoors or in a well-ventilated area. P280 - Wear protective gloves/protective clothing/eye protection/face protection. P284 - In case of inadequate ventilation wear respiratory protection. Do not handle until all safety precautions have been read and understood Avoid breathing dust. Use (saw, sand, etc.) only outdoors or in a well-ventilated area. Wear protective gloves/protective clothing/eye protection/face protection. In case of inadequate ventilation wear respiratory protection.
Response
P304+P340 - IF INHALED Remove person to fresh air and keep comfortable for breathing. P342+P311 - If experiencing respiratory symptoms: Call a POISON CENTER/doctor. P302+P352 - IF ON SKIN: Wash with plenty of water. P362+P364 - Take off contaminated clothing and wash it before reuse. P333+P313 - If skin irritation or rash occurs: Get medical advice/attention. P308+P313 - IF exposed or concerned: Get medical advice/attention. Storage/Disposal • P501 - Dispose of content and/or container in accordance with local, regional, national, and/or international regulations. IF INHALED Remove person to fresh air and keep comfortable for breathing If experiencing respiratory symptoms: Call a POISON CENTER or doctor/physician. If on skin: Wash with plenty of water. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse. IF exposed or concerned: Get medical advice/attention. Storage/Disposal • Dispose of content and/or container in accordance with local, regional, national, and/or international regulations.
2.3 Other hazards
CLP • May form combustible dust concentrations in air. According to Regulation (EC) No. 1272/2008 (CLP) this material is considered hazardous. United States (US) According to: OSHA 29 CFR 1910.1200 HCS WHMIS 2015 • Under Canadian regulations (Workplace Hazardous Materials Information System (WHMIS) - Hazardous Products Act (HPA), Section 11(1)), these product(s) are exempt and considered manufactured article(s) under stated normal conditions of use.
Other hazards
OSHA HCS 2012 • Under United States Regulations (29 CFR 1910.1200 - Hazard Communication Standard), this product is considered hazardous. Canada According to: WHMIS 2015
Further information
This product is not hazardous in the form in which it is shipped by the manufacturer but health and/or physical hazards may be created by downstream activities (e.g., cutting, sanding, milling) that reduce its particle size. Those hazards are described above. • This may be a treated engineered wood article: • Treated panel, siding, trim, laminated strand lumber (LSL), or I-Joist products which incorporate a biocidal product to control wood destroying organisms (insect or fungal). Active Ingredient: Boric Acid. • Treated I-Joist or laminated veneer lumber products which incorporate a biocidal product to control wood destroying organisms (insect). Active Ingredients: Bifenthrin, or Imidacloprid. • When working with any of the treated products, the following is recommended: Use (saw, sand, etc.) only outdoors in a well-ventilated area. Avoid breathing wood dust. In case of inadequate ventilation, wear respiratory protection. Wear appropriate PPE (gloves, eye, and face protection). Do not eat, drink or smoke when using this product. Wash thoroughly with soap and water after handling and before eating, drinking, or using tobacco. Avoid prolonged and repeated contact with the skin. Store in a protected location. Dispose of waste material in accordance with local, regional and national regulations.
