THERMOSET EP-830 RESIN

Hazard statements (CLP)

H315, H317, H319, H341, H372, H373, H402, H412

Code

Statements

H315

Causes skin irritation

SECTION 2: Hazards identification

GHS CLASSIFICATION Skin corrosion/irritation Category 2 Serious eye damage/eye irritation Category 2A Skin sensitization Category 1 Germ cell mutagenicity Category 2 Specific target organ systemic toxicity (repeated exposure) Category 2 Nose Specific target organ systemic toxicity (repeated exposure) Category 1 Hazardous to the aquatic environment - acute hazard Category 3 Hazardous to the aquatic environment - chronic hazard Category 3

Signal word

DANGER

Hazard statements

Causes skin irritation. Causes serious eye irritation. May cause an allergic skin reaction. Suspected of causing genetic defects. May cause damage to organs through prolonged or repeated exposure.(Nose) Causes damage to organs through prolonged or repeated exposure. Harmful to aquatic life. Harmful to aquatic life with long lasting effects.

Prevention

Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves, eye protection, face protection. Use personal protective equipment as required. Do not breathe dust, fume, mist, vapors, spray. Wash thoroughly after handling. 300000004327 Do not eat, drink or smoke when using this product. Contaminated work clothing should not be allowed out of the workplace. Avoid release to the environment.

Response

Get medical advice, attention if you feel unwell. IF exposed or concerned: Get medical advice, attention. Specific treatment (see supplemental first aid instructions on this label). IF ON SKIN: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice, attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice, attention. Take off contaminated clothing and wash before reuse.

Storage

Store locked up.

Disposal

Dispose of contents/container in accordance with waste/disposal laws and regulations of your country or particular locality.

2.3 Other hazards

This product contains component(s) which have the following warnings; however based on the GHS classification criteria of your country or locale, the product mixture may be outside the respective category(s). Acute: May be harmful if swallowed. Ingestion is not an expected route of entry in industrial or commercial uses. Chronic: Prolonged exposure to the silica-containing sanding dust of this product could cause long-term lung damage. Crystalline silica is classified by IARC and NTP as a known human carcinogen as a respirable dust. The silica in Parker Lord products is not in a form that can be inhaled and presents no risk to the end user. No exposure is expected during normal use of this product. Sanding or abrading the cured materials is not recommended. Wear appropriate respiratory protection if exposure to dusts is possible.

2.1 Classification of the substance or mixture

Skin corrosion/irritation Category 2 Serious eye damage/eye irritation Category 2A Skin sensitization Category 1 Germ cell mutagenicity Category 2 Specific target organ systemic toxicity (repeated exposure) Category 2 Nose Specific target organ systemic toxicity (repeated exposure) Category 1 Hazardous to the aquatic environment - acute hazard Category 3 Hazardous to the aquatic environment - chronic hazard Category 3