Note: Ingredients listed on restricted chemical lists
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
15-20% 0.1-0.9%
EC/CAS
110-85-0
Name of the chemical
Piperazin
Concentration
0.1-0.9%
General Information
Revision date
2019-10-07
Product name
FUSOR 132 133 PLASTIC REPAIR ADH PT B
1.2.1 Relevant identified uses
Urethane Adhesive, Part 2 of 2
Icons in SDS
Company Information
company name
LORD Corporation
GHS Information
Signal word
DANGER
Section 2
2.1 Classification of the substance or mixture
Skin sensitization Category 1 Respiratory sensitization Category 1 Reproductive toxicity Category 2
Signal word
DANGER
Hazard statements
May cause an allergic skin reaction. May cause allergy or asthma symptoms or breathing difficulties if inhaled. Suspected of damaging fertility or the unborn child.
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves. Use personal protective equipment as required. In case of inadequate ventilation wear respiratory protection. Avoid breathing dust/fume/gas/mist/vapors/spray. Contaminated work clothing should not be allowed out of the workplace.
Response
IF exposed or concerned: Get medical advice/attention. Specific treatment (see supplemental first aid instructions on this label). IF INHALED: If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing. If experiencing respiratory symptoms: Call a POISON CENTER or doctor/physician. IF ON SKIN: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse.
Storage
300001006408 Store locked up.
Disposal
Dispose of contents/container in accordance with waste/disposal laws and regulations of your country or particular locality.
2.3 Other hazards
This product contains component(s) which have the following warnings; however based on the GHS classification criteria of your country or locale, the product mixture may be outside the respective category(s). Acute: May cause severe eye irritation. Liquid and mists may cause irritation with redness of the conjunctiva. May cause mild skin irritation. Vapors generated at high temperatures may be irritating. May be harmful if swallowed. Ingestion is not an expected route of entry in industrial or commercial uses. Chronic: Prolonged exposure to the silica-containing sanding dust of this product could cause long-term lung damage. Crystalline silica is classified by IARC and NTP as a known human carcinogen as a respirable dust. The silica in LORD products is not in a form that can be inhaled and presents no risk to the end user. No exposure is expected during normal use of this product. Sanding or abrading the cured materials is not recommended. Wear appropriate respiratory protection if exposure to dusts is possible.