Note: Ingredients listed on restricted chemical lists
EC/CAS
1314-13-2
Name of the chemical
Zinc oxide; C.I. 77947
Concentration
N/A
General Information
Revision date
2020-07-15
Product name
CoolTherm MT-220C
CAS No.
1314-13-2
1.2.1 Relevant identified uses
Thermally Conductive Adhesive
Icons in SDS
Company Information
company name
LORD Corporation
GHS Information
Signal word
WARNING
Section 2
2.1 Classification of the substance or mixture
Serious eye damage/eye irritation Category 2B Hazardous to the aquatic environment - acute hazard Category 2 Hazardous to the aquatic environment - chronic hazard Category 2
Signal word
WARNING
Hazard statements
Causes eye irritation. Toxic to aquatic life. Toxic to aquatic life with long lasting effects.
Prevention
Wash thoroughly after handling. Avoid release to the environment.
Response
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Collect spillage.
Storage
Refer to Section 7 of this SDS.
Disposal
Dispose of contents/container in accordance with waste/disposal laws and regulations of your country or particular locality.
2.3 Other hazards
300001008698 This product contains component(s) which have the following warnings; however based on the GHS classification criteria of your country or locale, the product mixture may be outside the respective category(s). Acute: May cause skin irritation. May be harmful if swallowed. Ingestion is not an expected route of entry in industrial or commercial uses. Do not breathe sanding dust. Chronic: This product contains methylpolysiloxanes which can generate formaldehyde at approximately 300 degrees F (150 C) and above, in atmospheres which contain oxygen. Formaldehyde is a skin and respiratory sensitizer, eye and throat irritant, acute toxicant, and known cancer hazard. Workplace exposure to formaldehyde is regulated by OSHA Standard 29 CFR 1910.1048.
