Note: Ingredients listed on restricted chemical lists
EC/CAS
1314-13-2
Name of the chemical
Zinc oxide; C.I. 77947
Concentration
15-20% 10-15% 5-10% 1-5% 1-5%
General Information
Revision date
2023-03-22
Product name
CoolTherm MT-125
CAS No.
1314-13-2
1.2.1 Relevant identified uses
Thermally Conductive Adhesive
Emergency telephone
800 424-9300, 703 527-3887
Icons in SDS
Company Information
company name
LORD Corporation
GHS Information
Signal word
DANGER
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H332, H334, H370, H372, H401, H411
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
GHS CLASSIFICATION Acute toxicity Inhalation - Dust and MistCategory 4 - 26.0% of the mixture consists of ingredient(s) of unknown toxicity Skin corrosion/irritation Category 2 Serious eye damage/eye irritation Category 2A Skin sensitization Category 1 Respiratory sensitization Category 1 Specific target organ systemic toxicity (single exposure) Category 1 Respiratory system Specific target organ systemic toxicity (repeated exposure) Category 1 Respiratory system Hazardous to the aquatic environment - acute hazard Category 2 Hazardous to the aquatic environment - chronic hazard Category 2
Signal word
DANGER
Hazard statements
Harmful if inhaled. Causes skin irritation. Causes serious eye irritation. May cause an allergic skin reaction. May cause allergy or asthma symptoms or breathing difficulties if inhaled. Causes damage to organs.(Respiratory system) Causes damage to organs through prolonged or repeated exposure.(Respiratory system) Toxic to aquatic life. Toxic to aquatic life with long lasting effects.
Prevention
300000004475 Wear protective gloves, eye protection, face protection. In case of inadequate ventilation wear respiratory protection. Do not breathe dust, fume, mist, vapors, spray. Wash thoroughly after handling. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Contaminated work clothing should not be allowed out of the workplace. Avoid release to the environment.
Response
Call a POISON CENTER or doctor, physician if you feel unwell. IF exposed: Call a POISON CENTER or doctor, physician. Specific treatment (see supplemental first aid instructions on this label). IF INHALED: Remove to fresh air and keep at rest in a position comfortable for breathing. If experiencing respiratory symptoms: Call a POISON CENTER or doctor, physician. IF ON SKIN: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice, attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Take off contaminated clothing and wash before reuse. Collect spillage.
Storage
Store locked up.
Disposal
Dispose of contents/container in accordance with waste/disposal laws and regulations of your country or particular locality.
2.3 Other hazards
This product contains component(s) which have the following warnings; however based on the GHS classification criteria of your country or locale, the product mixture may be outside the respective category(s). Acute: May be harmful if swallowed. Ingestion is not an expected route of entry in industrial or commercial uses. Chronic: Contains an epoxy resin which is a possible mutagen, based on animal data. Repeated or prolonged skin contact may cause allergic reactions with susceptible persons.
2.1 Classification of the substance or mixture
Acute toxicity Inhalation - Dust and MistCategory 4 - 26.0% of the mixture consists of ingredient(s) of unknown toxicity. Skin corrosion/irritation Category 2 Serious eye damage/eye irritation Category 2A Skin sensitization Category 1 Respiratory sensitization Category 1 Specific target organ systemic toxicity (single exposure) Category 1 Respiratory system Specific target organ systemic toxicity (repeated exposure) Category 1 Respiratory system Hazardous to the aquatic environment - acute hazard Category 2 Hazardous to the aquatic environment - chronic hazard Category 2