Note: Ingredients listed on restricted chemical lists
EC/CAS
1314-13-2
Name of the chemical
Zinc oxide; C.I. 77947
Concentration
30-35%
EC/CAS
556-67-2
Name of the chemical
D4
Concentration
0.1-0.9%
General Information
Revision date
2024-11-01
Product name
CoolTherm MG-121
1.2.1 Relevant identified uses
Thermal Interface Material LORD Corporation 111 LORD Drive Cary, NC 27511-7923 USA
Emergency telephone
800 424-9300, 703 527-3887
Icons in SDS
Company Information
company name
LORD Corporation
GHS Information
Signal word
WARNING
Hazard Codes
Hazard statements (CLP)
H332, H361, H400, H410
Hazard statements
Code
Statements
H332
Harmful if inhaled
Section 2
SECTION 2: Hazards identification
OSHA GHS CLASSIFICATION Acute toxicity Inhalation - Dust and MistCategory 4 - 13.2% of the mixture consists of ingredient(s) of unknown toxicity Reproductive toxicity Category 2 Hazardous to the aquatic environment - acute hazard Category 1 Hazardous to the aquatic environment - chronic hazard Category 1
Signal word
WARNING
Hazard statements
Harmful if inhaled. Suspected of damaging fertility or the unborn child. Very toxic to aquatic life. Very toxic to aquatic life with long lasting effects.
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Use personal protective equipment as required. Avoid breathing dust/fume/gas/mist/vapors/spray. Use only outdoors or in a well-ventilated area. Avoid release to the environment.
Response
Call a POISON CENTER or doctor, physician if you feel unwell. IF INHALED: Remove to fresh air and keep at rest in a position comfortable for breathing. Collect spillage.
Storage
300000006130 Store locked up.
Disposal
Dispose of contents/container in accordance with waste/disposal laws and regulations of your country or particular locality.
2.3 Other hazards
This product contains component(s) which have the following warnings; however based on the GHS classification criteria of your country or locale, the product mixture may be outside the respective category(s). Acute: This product contains a residual amount of a chemical substance that may cause an allergic skin and/or respiratory reaction. May be harmful if swallowed. Ingestion is not an expected route of entry in industrial or commercial uses.May cause skin and eye irritation. Chronic: This product contains methylpolysiloxanes which can generate formaldehyde at approximately 300 degrees F (150 C) and above, in atmospheres which contain oxygen. Formaldehyde is a skin and respiratory sensitizer, eye and throat irritant, acute toxicant, and known cancer hazard. Workplace exposure to formaldehyde is
2.1 Classification of the substance or mixture
Acute toxicity Inhalation - Dust and MistCategory 4 - 13.2% of the mixture consists of ingredient(s) of unknown toxicity. Reproductive toxicity Category 2 Hazardous to the aquatic environment - acute hazard Category 1 Hazardous to the aquatic environment - chronic hazard Category 1