CoolTherm EP-6011 HARDENER

2.1 Classification of the substance or mixture

Skin corrosion/irritation Category 1 Serious eye damage/eye irritation Category 1 Skin sensitization Category 1 Reproductive toxicity Category 2 Specific target organ systemic toxicity (repeated exposure) Category 2 Respiratory system Hazardous to the aquatic environment - acute hazard Category 3 Hazardous to the aquatic environment - chronic hazard Category 3

Signal word

DANGER

Hazard statements

Causes severe skin burns and eye damage. Causes serious eye damage. May cause an allergic skin reaction. Suspected of damaging fertility or the unborn child. May cause damage to organs through prolonged or repeated exposure.(Respiratory system) Harmful to aquatic life. Harmful to aquatic life with long lasting effects.

Prevention

Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves. Use personal protective equipment as required. Do not breathe dust/fume/gas/mist/vapors/spray. Wash thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. 300000008092 Avoid release to the environment.

Response

Immediately call a POISON CENTER or doctor/physician. Specific treatment (see supplemental first aid instructions on this label). IF INHALED: Remove to fresh air and keep at rest in a position comfortable for breathing. IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF SWALLOWED: rinse mouth. Do NOT induce vomiting. Wash contaminated clothing before reuse.

Storage

Store locked up.

Disposal

Dispose of contents/container in accordance with waste/disposal laws and regulations of your country or particular locality.

2.3 Other hazards

This product contains component(s) which have the following warnings; however based on the GHS classification criteria of your country or locale, the product mixture may be outside the respective category(s). Acute: Dermal absorption possible. Symptoms of inhalation exposure may include burning sensation, coughing, wheezing, laryngitis, shortness of breath, headache, nausea, and vomiting. May cause allergic respiratory reaction. Silane monomer 1 in this product may decompose to become ethanol. For ethanol, the OSHA PEL is 1000 ppm, and the ACGIH TLV-TWA is 1000 ppm. This product contains an ingredient where aspiration into the lungs may occur during ingestion or vomiting causing tissue damage or lung injury. May be harmful if swallowed. Ingestion is not an expected route of entry in industrial or commercial uses. Chronic: May cause liver or kidney damage. May cause long-term lung damage. This product contains methylpolysiloxanes which can generate formaldehyde at approximately 300 degrees F (150 C) and above, in atmospheres which contain oxygen. Formaldehyde is a skin and respiratory sensitizer, eye and throat irritant, acute toxicant, and known cancer hazard. Workplace exposure to formaldehyde is regulated by OSHA Standard 29 CFR 1910.1048.