Silicon tetrafluoride

Hazard statements (CLP)

H280, H314, H318, H330

Code

Statements

H280

Contains gas under pressure; may explode if heated

Classification (GHS-US)

Press. Gas (Comp.) H280 Acute Tox. 2 (Inhalation: gas) H330 Skin Corr. 1A H314 Eye Dam. 1 H318

2.2 Label elements

GHS US labeling

Hazard pictograms

GHS04 GHS05 GHS06

Signal word

Danger

Hazard statements

H280 - CONTAINS GAS UNDER PRESSURE; MAY EXPLODE IF HEATED H314 - CAUSES SEVERE SKIN BURNS AND EYE DAMAGE H330 - FATAL IF INHALED CGA-HG22 - CORROSIVE TO THE RESPIRATORY TRACT

Precautionary statements

P202 - Do not handle until all safety precautions have been read and understood. P260 - Do not breathe gas/vapors P262 - Do not get in eyes, on skin, or on clothing. P264 - Wash exposed skin thoroughly after handling P271+P403 - Use and store only outdoors or in a well-ventilated place. P280+P284 - Wear protective gloves, protective clothing, eye protection, respiratory protection, and/or face protection. P303, P361, P353, P363, P310 - IF ON SKIN OR (HAIR): Take off immediately all contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse. Immediately call a poison center or doctor/physician. CGA-PG34 - SPECIFIC TREATMENT: Immediately apply calcium gluconate or equivalent to affected areas. P304+P340 - IF INHALED: Remove person to fresh air and keep comfortable for breathing. P310 - Immediately call a poison center or doctor/physician. P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Contact an ophthalmologist immediately. P405 - Store locked up. P501 - Dispose of contents/container in accordance with local/regional/national/international regulations. Contact supplier for any special requirements. CGA-PG05 - Use a back flow preventive device in the piping. CGA-PG20+CGA-PG10 - Use only with equipment of compatible materials of construction and rated for cylinder pressure. CGA-PG12 - Do not open valve until connected to equipment prepared for use. CGA-PG18 - When returning cylinder, install leak tight valve outlet cap or plug. CGA-PG06 - Close valve after each use and when empty. CGA-PG02 - Protect from sunlight when ambient temperature exceeds 52°C (125°F).

Other hazards which do not result in classification

None. 2.4.

Ingredient(s) with unknown acute toxicity

No data available