Note: Ingredients listed on restricted chemical lists
EC/CAS
7440-02-0
Name of the chemical
Nickel
Concentration
20-<50%
EC/CAS
7429-90-5
Name of the chemical
Aluminium
Concentration
0.1-<1%
EC/CAS
1344-09-8
Name of the chemical
Silicic acid, sodium salt
Concentration
0.1-<1%
EC/CAS
65996-61-4
Name of the chemical
Cellulose pulp
Concentration
0.1-<1%
EC/CAS
9004-62-0
Name of the chemical
hydroxyethylcellulose
Concentration
0.1-<1%
General Information
Version
1.0
Revision date
2019-10-23
Product name
SUPERFONTE BM
1.2.1 Relevant identified uses
SMAW (Shielded Metal Arc Welding)
1.2.2. Uses advised against
Not known. Read this SDS before using this product
Emergency telephone
+1 (888) 609-1762, +1 (216) 383-8962, +1 (216) 383-8966, +1 (216) 383-8969
Icons in SDS
Company Information
company name
Lincoln Electric Europe B.V
GHS Information
Signal word
No signal word
Section 2
SECTION 2: Hazards identification
result in GHS classification: Classified according to the criteria of the Globally Harmonized System of Classification and Labeling of Chemicals (GHS). Emergency Overview Form Solid Physical state Solid
Hazard statements
Welding arc and sparks can ignite combustible and flammable products. Arc rays can injure eyes and burn skin. Electric shock can kill. Not applicable
2.1 Classification of the substance or mixture
Not classified as hazardous according to applicable GHS hazard classification criteria.
Hazard pictograms
No symbol
Signal word
No signal word.
Precautionary statements
Not applicable Other hazards which do not Electrical Shock can kill. If welding must be performed in damp locations or result in GHS classification with wet clothing, on metal structures or when in cramped positions such as sitting, kneeling or lying, or if there is a high risk of unavoidable or accidental contact with work piece, use the following equipment: Semiautomatic DC Welder, DC Manual (Stick) Welder, or AC Welder with Reduced Voltage Control. Arc rays can injure eyes and burn skin. Welding arc and sparks can ignite combustibles and flammable materials. Overexposure to welding fumes and gases can be hazardous. Read and understand the manufacturer’s instructions, Safety Data Sheets and the precautionary labels before using this product. Refer to Section 8. Substance(s) formed under the The welding fume produced from this welding electrode may contain the conditions of use following constituent(s) and/or their complex metallic oxides as well as solid particles or other constituents from the consumables, base metal, or base metal coating not listed below. Chemical Identity CAS-No. Carbon dioxide 124-38-9 Carbon monoxide 630-08-0 Nitrogen dioxide 10102-44-0 Ozone 10028-15-6 Manganese 7439-96-5 Nickel 7440-02-0 Copper and/or copper alloys and compounds (as Cu) 7440-50-8 Fluorides (as F) 16984-48-8
