Note: Ingredients listed on restricted chemical lists
EC/CAS
232-188-7/7789-75-5
Name of the chemical
Calcium fluoride
Concentration
10-<20%
EC/CAS
215-138-9/1305-78-8
Name of the chemical
Calcium oxide
Concentration
1-<5%
EC/CAS
238-878-4/14808-60-7
Name of the chemical
Silica, crystalline
Concentration
1-<5%
EC/CAS
231-667-8/7681-49-4
Name of the chemical
Sodium fluoride
Concentration
1-<5%
EC/CAS
215-687-4/1344-09-8
Name of the chemical
Silicic acid, sodium salt
Concentration
1-<5%
EC/CAS
231-105-1/7439-96-5
Name of the chemical
Manganese
Concentration
0,1-<1%
EC/CAS
231-100-4/7439-92-1
Name of the chemical
Blei, massiv: [Partikeldurchmesser ≥ 1 mm]
Concentration
0,03-<0,1%
General Information
Version
2.0
Revision date
2021-08-10
Product name
OP120C
1.2.1 Relevant identified uses
SAW (Submerged Arc Welding)
1.2.2. Uses advised against
Not known. Read this SDS before using this product
Emergency telephone
+1 (888) 609-1762, +1 (216) 383-8962, +1 (216) 383-8966, +1 (216) 383-8969
Icons in SDS
Company Information
company name
Lincoln Electric Europe B.V
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H360FD, H373
Hazard statements
Code
Statements
H360FD
May damage fertility; May damage the unborn child
Section 2
SECTION 2: Hazards identification
Classification according to Regulation (EC) No 1272/2008 as amended The product contains less than 0.1% of respirable crystalline silica. Classification of the substance or mixture The product has been classified according to the legislation in force
Contains
Sodium fluoride Lead
Signal word
Danger
Hazard statements
H360FD: May damage fertility. May damage the unborn child. H373: May cause damage to organs Bone through prolonged or repeated exposure.
Prevention
P201: Obtain special instructions before use. P202: Do not handle until all safety precautions have been read and understood. P260: Do not breathe dust/fume/gas/mist/vapors/spray. P280: Wear protective gloves/protective clothing/eye protection/face protection.
Response
P308+P313 IF exposed or concerned Get medical advice/attention
Disposal
P501: Dispose of contents/ container to an approved facility in accordance with local, regional, national and international regulations.
Supplemental label elements
EUH212 Warning! Hazardous respirable dust may be formed when used. Do not breathe dust. Safety data sheet available for professional user on request
2.3 Other hazards
Electrical Shock can kill. If welding must be performed in damp locations or with wet clothing, on metal structures or when in cramped positions such as sitting, kneeling or lying, or if there is a high risk of unavoidable or accidental contact with work piece, use the following equipment: Semiautomatic DC Welder, DC Manual (Stick) Welder, or AC Welder with Reduced Voltage Control. Arc rays can injure eyes and burn skin. Welding arc and sparks can ignite combustibles and flammable materials. Overexposure to welding fumes and gases can be hazardous. Read and understand the manufacturer’s instructions, Safety Data Sheets and the precautionary labels before using this product. Refer to Section 8. Substance(s) formed under the conditions of use The welding fume produced from this welding electrode may contain the following constituent(s) and/or their complex metallic oxides as well as solid particles or other constituents from the consumables, base metal, or base metal coating not listed below. Chemical name Carbon dioxide Carbon monoxide Nitrogen dioxide Ozone CAS-No. 124-38-9 630-08-0 10102-44-0 10028-15-6
2.1 Classification of the substance or mixture
The product has been classified according to the legislation in force. Classification according to Regulation (EC) No 1272/2008 as amended. Health Hazards Toxic to reproduction Category 1A H360FD Specific Target Organ Toxicity - Category 2 H373 Repeated Exposure
