Note: Ingredients listed on restricted chemical lists
EC/CAS
232-188-7/7789-75-5
Name of the chemical
Calcium fluoride
Concentration
10-<20%
EC/CAS
215-687-4/1344-09-8
Name of the chemical
Silicic acid, sodium salt
Concentration
5-<10%
EC/CAS
231-157-5/7440-47-3
Name of the chemical
Chromium‡
Concentration
1-<5%
EC/CAS
231-105-1/7439-96-5
Name of the chemical
Manganese
Concentration
1-<5%
EC/CAS
238-878-4/14808-60-7
Name of the chemical
Silica, crystalline
Concentration
0,1-<1%
EC/CAS
215-138-9/1305-78-8
Name of the chemical
Calcium oxide
Concentration
0,1-<1%
EC/CAS
215-202-6/1313-13-9
Name of the chemical
Manganese dioxide
Concentration
0,1-<1%
General Information
Version
1.0
Revision date
2024-03-31
Product name
Fluxo Lincoln R-30 FB
1.2.1 Relevant identified uses
SAW (Submerged Arc Welding)
1.2.2. Uses advised against
Not known. Read this SDS before using this product
Emergency telephone
+1 (888) 609-1762, +1 (216) 383-8962, +1 (216) 383-8966, +1 (216) 383-8969
Icons in SDS
Company Information
company name
Lincoln Electric Europe B.V
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H314, H318
Hazard statements
Code
Statements
H314
Causes severe skin burns and eye damage.
H318
Causes serious eye damage.
Section 2
SECTION 2: Hazards identification
Classification according to Regulation (EC) No 1272/2008 as amended The product contains less than 0.1% of respirable crystalline silica. Classification of the substance or mixture The product has been classified according to the legislation in force
Contains
Sodium silicate
Signal word
Danger
Hazard statements
H314: Causes severe skin burns and eye damage.
Prevention
P260: Do not breathe dust/fume/gas/mist/vapors/spray. P264: Wash face, hands and any exposed skin thoroughly after handling. P280: Wear protective gloves/ protective clothing/ eye protection/ face protection.
Response
P301+P330+P331 IF SWALLOWED Rinse mouth. Do NOT induce vomiting. P310: Immediately call a POISON CENTER or doctor/ physician. P303+P361+P353 IF ON SKIN (or hair) Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P305+P351+P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Disposal
P501: Dispose of contents/ container to an approved facility in accordance with local, regional, national and international regulations.
Supplemental label elements
Safety data sheet available for professional user on request
2.3 Other hazards
Electrical Shock can kill. If welding must be performed in damp locations or with wet clothing, on metal structures or when in cramped positions such as sitting, kneeling or lying, or if there is a high risk of unavoidable or accidental contact with work piece, use the following equipment: Semiautomatic DC Welder, DC Manual (Stick) Welder, or AC Welder with Reduced Voltage Control. Arc rays can injure eyes and burn skin. Welding arc and sparks can ignite combustibles and flammable materials. Overexposure to welding fumes and gases can be hazardous. Read and understand the manufacturer’s instructions, Safety Data Sheets and the precautionary labels before using this product. Refer to Section 8. Substance(s) formed under the conditions of use The welding fume produced from this welding electrode may contain the following constituent(s) and/or their complex metallic oxides as well as solid particles or other constituents from the consumables, base metal, or base metal coating not listed below. Chemical name Carbon dioxide Carbon monoxide Nitrogen dioxide Ozone CAS-No. 124-38-9 630-08-0 10102-44-0 10028-15-6
2.1 Classification of the substance or mixture
The product has been classified according to the legislation in force. Classification according to Regulation (EC) No 1272/2008 as amended. Health Hazards Skin corrosion Category 1A H314 Serious eye damage Category 1 H318