Note: Ingredients listed on restricted chemical lists
EC/CAS
208-915-9/546-93-0
Name of the chemical
Magnesium-carbonate
Concentration
5-<10%
EC/CAS
265-995-8/65996-61-4
Name of the chemical
Cellulose pulp
Concentration
1-<5%
EC/CAS
231-105-1/7439-96-5
Name of the chemical
Manganese
Concentration
1-<5%
EC/CAS
236-675-5/13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
1-<5%
EC/CAS
231-153-3/7440-44-0
Name of the chemical
Carbon black
Concentration
0,1-<1%
EC/CAS
238-878-4/14808-60-7
Name of the chemical
Silica, crystalline
Concentration
0,1-<1%
EC/CAS
231-159-6/7440-50-8
Name of the chemical
Copper
Concentration
0,1-<1%
EC/CAS
215-168-2
Name of the chemical
Iron Oxide Red
Concentration
1-<5%
General Information
Version
5.0
Revision date
2025-05-14
Product name
AS OLUK AÇMA
1.2.1 Relevant identified uses
CAC (Carbon Arc Cutting) or other electrode related cutting, beveling, or gouging processes
1.2.2. Uses advised against
Not known. Read this SDS before using this product
Emergency telephone
+1 (888) 609-1762, +1 (216) 383-8962, +1 (216) 383-8966, +1 (216) 383-8969, +359 2 9154 233, +39 055 794 7819, +371 67042473, +420 224 919 293, +370 (5) 2362052, +49 (0) 89 19240, 31(0)30 274 8888, +45 8212 1212, 22 59 13 00, +34 91 562 04 20, +48 12 411 99 99, 0800 147 111, +351 800 250 250, +33 1 45 42 59 59, +40 21 599 2300, 0344 892 0111, (0030) 2107793777, +3851 2348 342, +421 2 5477 4166, +36-80-201-199
Icons in SDS
Company Information
company name
Lincoln Electric Europe B.V
e-mail address of the competent person responsible for the Safety Data Sheet
SDS@lincolnelectric.com
Section 2
SECTION 2: Hazards identification
Classification according to Regulation (EC) No 1272/2008 as amended Classification of the substance or mixture The product has not been classified as hazardous according to the legislation in force
2.2 Label elements
Not applicable
Supplemental label elements
EUH210 Safety data sheet available on request
2.3 Other hazards
Electrical Shock can kill. If welding must be performed in damp locations or with wet clothing, on metal structures or when in cramped positions such as sitting, kneeling or lying, or if there is a high risk of unavoidable or accidental contact with work piece, use the following equipment: Semiautomatic DC Welder, DC Manual (Stick) Welder, or AC Welder with Reduced Voltage Control. Arc rays can injure eyes and burn skin. Welding arc and sparks can ignite combustibles and flammable materials. Overexposure to welding fumes and gases can be hazardous. Read and understand the manufacturer’s instructions, Safety Data Sheets and the precautionary labels before using this product. Refer to Section 8. The carbon arc cutting or gouging process generates high levels of noise, potentially exposing workers to hazardous sound levels from 108-120 dB(A). Workers who perform the cutting or gouging process, as well as those workers in close proximity to the process, are at risk for noise-induced hearing loss. Ensure affected workers wear adequate hearing protection when carbon arc cutting or gouging is taking place in order to prevent overexposures to noise. Substance(s) formed under the conditions of use The carbon arc cutting or gouging process involves using a carbon electrode in combination with compressed air to melt and remove metal from a metallic or metal alloy material surface. This process also produces airborne metallic fumes which may contain copper and metallic oxides directly related to the composition of the metal or metal alloy surface to which the process is being applied. Carbon arc cutting or gouging of alloy materials containing chromium may produce airborne hexavalent chromium, a known respiratory carcinogen. Any surface coatings or lubricants will also contribute airborne contaminants when carbon arc cutting or gouging is applied. Refer to the SDS for any surface coating materials as well as the SDS for the metal material being worked. Take all precautions necessary to prevent overexposures to airborne contaminants.
2.1 Classification of the substance or mixture
The product has not been classified as hazardous according to the legislation in force. Classification according to Regulation (EC) No 1272/2008 as amended. Not classified
