Note: Ingredients listed on restricted chemical lists
EC/CAS
231-141-8/7440-31-5
Name of the chemical
Tin
Concentration
50-<100%
EC/CAS
231-146-5/7440-36-0
Name of the chemical
Antimony
Concentration
2,5-<5%
EC/CAS
235-186-4/12125-02-9
Name of the chemical
Ammonium chloride
Concentration
1-<5%
General Information
Version
1.0
Revision date
2022-04-20
Product name
95/5 Tin-Antimony Solder Paste
1.2.1 Relevant identified uses
Metal Soldering
1.2.2. Uses advised against
Not known. Read this SDS before using this product
Emergency telephone
+1 (888) 609-1762, +1 (216) 383-8962, +1 (216) 383-8966, +1 (216) 383-8969
Icons in SDS
Company Information
company name
Lincoln Electric Europe B.V
e-mail address of the competent person responsible for the Safety Data Sheet
custservmason@jwharris.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H314, H318, H335, H411
Hazard statements
Code
Statements
H314
Causes severe skin burns and eye damage
Section 2
SECTION 2: Hazards identification
Classification according to Regulation (EC) No 1272/2008 as amended Classification of the substance or mixture The product has been classified according to the legislation in force
Health hazards
Skin corrosion Category 1 H314 Serious eye damage Category 1 H318 Specific Target Organ Toxicity - Category 3 H335 Single Exposure
Environmental hazards
Chronic hazards to the aquatic Category 2 H411
Contains
Zinc chloride
Signal word
Danger
Hazard statements
H314: Causes severe skin burns and eye damage. H335: May cause respiratory irritation. H411: Toxic to aquatic life with long lasting effects.
Prevention
P260: Do not breathe dust/fume/gas/mist/vapors/spray. P264: Wash face, hands and any exposed skin thoroughly after handling. P273: Avoid release to the environment. P280: Wear protective gloves/protective clothing/eye protection/face protection.
Response
P301+P330+P331 IF SWALLOWED Rinse mouth. Do NOT induce vomiting. P310: Immediately call a POISON CENTER or doctor/ physician. P303+P361+P353 IF ON SKIN (or hair) Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P312: Call a POISON CENTER or doctor/ physician if you feel unwell. P305+P351+P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P391: Collect spillage.
2.3 Other hazards
Overexposure to fumes and gases from the solder and/or flux material can be hazardous. Read and understand the manufacturer’s instructions, Safety Data Sheets and the precautionary labels before using this product. Substance(s) formed under the conditions of use Fumes produced from use of this product may contain the following constituent(s) and/or their complex metallic oxides as well as solid particles or other constituents from the solder, brazing consumable, flux material or base metal, or base metal coating not listed below. Chemical name Carbon dioxide Carbon monoxide Nitrogen dioxide Ozone CAS-No. 124-38-9 630-08-0 10102-44-0 10028-15-6
2.1 Classification of the substance or mixture
The product has been classified according to the legislation in force. Classification according to Regulation (EC) No 1272/2008 as amended. Health Hazards Skin corrosion Category 1 H314 Serious eye damage Category 1 H318 Specific Target Organ Toxicity - Category 3 H335 Single Exposure Environmental Hazards Chronic hazards to the aquatic Category 2 H411 environment
