LEGGARI TEXTURE COAT GRAY

Hazard statements (CLP)

H303, H314, H317, H318, H331, H333, H334, H335, H350, H373

Code

Statements

H303

May be harmful if swallowed

2.1 Classification of the substance or mixture

Acute Toxicity Oral –Category 4 • Acute Toxicity Dermal –Category 4 • Acute Toxicity Inhalation –Category 3 • Skin Corrosion/Irritation –Category 1B • Eye Damage –Category 1 • Respiratory Sensitization –Category 1 • Skin Sensitization –Category 1 • Carcinogenicity –Category 1A • Specific Target Organ Toxicity Repeated –Category 1

Hazard statements

H303 May be harmful if swallowed H314 Causes severe skin burns and eye damage H317 May cause an allergic skin reaction H318 Causes serious eye damage H331 Toxic if inhaled H333 May be harmful if inhaled H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H335 May cause respiratory irritation H350 May cause cancer H373 May cause damage to organs through prolonged or repeated exposure (lungs)

Precautionary statements

P102 Keep out of reach of children P103 Read label before use P260 Do not breathe dust/fumes/gas/mist/vapors/spray P264 Wash thoroughly after handling P270 Do not eat, drink or smoke when using this product P271 Use only outdoors or in a well-ventilated area P272 Contaminated work clothing should not be allowed out of the workplace P280 Wear protective gloves/protective clothing/eye protection/face protection P285 In case of inadequate ventilation wear respiratory protection P501 Dispose of contents and container in accordance with all local, regional, national and international regulations HMIS-RATINGS (SCALE 0-4) HEALTH = 2 FIRE = 0 REACTIVITY = 0 0

NFPA Ratings

2 0 EMERGENCY OVERVIEW: This product is a light gray dry powder. A single short term exposure to the dry powder is not likely to cause serious harm. However, exposure of sufficient duration to wet mixture can cause serious, potentially irreversible tissue (skin or eye) destruction in the form of chemical caustic burns. The same type of tissue destruction can occur if wet or moist areas of the body are exposed for sufficient duration to dry product. SYMPTOMS OF OVER-EXPOSURE BY ROUTE OF EXPOSURE: This product can damage skin, eyes, mucous membranes, and other contaminated tissue. INHALATION: Exposure to this product may cause irritation to the moist mucous membranes of the nose, throat, and upper respiratory system. It may also aggravate other lung conditions. Potential health effects of inhalation are as follows: Silicosis – Respirable crystalline silica (quartz) can cause silicosis, a fibrosis (scarring) of the lungs. Silicosis may be progressive: it may lead to disability and death. Lung Cancer – Crystalline silica (quartz) inhaled is classified by IARC as a carcinogen. Tuberculosis – Silicosis increases the risk of Tuberculosis. Autoimmune and Chronic Kidney Disease – Some studies show excess numbers of cases of scleroderma, connective tissue disorders, lupus, rheumatoid arthritis, chronic kidney diseases and end-stage kidney disease in workers exposed to respirable crystalline silica. Non-Malignant Respiratory diseases (other than Silicosis) – Some studies show an increased incidence in chronic bronchitis and emphysema in workers exposed to respirable crystalline silica. CONTACT WITH SKIN: Discomfort or pain cannot be relied upon to alert a person to a hazardous skin exposure. Consequently, the only effective means of avoiding skin injury or illness involves minimizing skin contact, particularly contact with wet product. Exposed persons may not feel discomfort until hours after the exposure has ended and significant injury has occurred. Exposure to dry material may cause drying of the skin with consequent mild irritation or more significant effects attributable to aggravation of other conditions. Dry material contacting wet skin or exposure to moist or wet Portland cement may cause more severe skin damage in the form of (caustic) chemical burns. Some individuals may exhibit an allergic response upon exposure to this material. The response may appear in a variety of forms ranging from a mild rash to severe skin ulcers. Persons already sensitized may react to their first contact with the product. CONTACT WITH EYES: Exposure to airborne dust may cause immediate or delayed irritation or inflammation. Eye contact by larger amounts of dry powder or splashes of wet material may cause effects ranging from moderate eye irritation to chemical burns and blindness. Such exposures require immediate first aid (see section 4) and medical attention to prevent significant damage to the eye. INGESTION: Though ingestion is not anticipated to be a significant route of over-exposure to this product, ingestion of large amounts can be harmful and requires immediate medical attention. INJECTION: Injection is not anticipated to be a significant route of over-exposure to this product. HEALTH EFFECTS OR RISKS FROM EXPOSURE: An Explanation in Laymens Terms. ACUTE: This product is corrosive, it can burn and damage eyes, skin,mucuous membranes, and any other exposure tissue. If inhaled, irritation of the respiratory system may occur, with coughing, and breathing difficulty. Though unlikely to occur during occupational use, ingestion of large quantities can be harmful. CHRONIC: Repeated skin contact with this product may result in dermatitis (inflammation and reddening of the skin) and skin sensitization.