Note: Ingredients listed on restricted chemical lists
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
25-50
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
25-50
EC/CAS
26447-40-5
Name of the chemical
Methylenediphenyl diisocyanate (see also specific isomers)
Concentration
2.5-5
General Information
Revision date
2022-01-14
Product name
Mega-Crete Fast Cure (Part A)
1.2.1 Relevant identified uses
Repair Material
supplier name
Canadian Distribution Center
Icons in SDS
Company Information
company name
Lawson Products, Inc
GHS Information
Signal word
DANGER
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H332, H334, H335, H351, H373
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
WHMIS 2015 Hazard Classification
Signal word
DANGER
Hazard statements
H332 - Harmful if inhaled H315 - Causes skin irritation H319 - Causes serious eye irritation H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled H317 - May cause an allergic skin reaction H351 - Suspected of causing cancer H335 - May cause respiratory irritation H373 - May cause damage to organs through prolonged or repeated exposure
Precautionary statements
General P101 - If medical advice is needed, have product container or label at hand P102 - Keep out of reach of children P103 - Read label before use.
Prevention
P201 - Obtain special instructions before use P202 - Do not handle until all safety precautions have been read and understood P260 - Do not breathe dust/fume/gas/mist/vapors/spray P264 - Wash skin thoroughly after handling P271 - Use only outdoors or in a well-ventilated area P272 - Contaminated work clothing should not be allowed out of the workplace P285 - In case of inadequate ventilation wear respiratory protection
Response
General P321 - For Specific treatment see section 4 of this sds P308 + P313 - IF exposed or concerned: Get medical advice/attention P312 - Call a POISON CENTER or doctor if you feel unwell Eyes P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P337 + P313 - If eye irritation persists: Get medical advice/attention Skin P302 + P352 - IF ON SKIN: Wash with plenty of water. P362 - Take off contaminated clothing and wash before reuse P333 + P313 - If skin irritation or rash occurs: Get medical advice/attention Inhalation P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing P342 + P311 - If experiencing respiratory symptoms: Call a POISON CENTER or doctor/physician
Storage
P403 + P233 - Store in a well-ventilated place. Keep container tightly closed P405 - Store locked up
Disposal
P501 -Dispose of contents and container in accordance with local, regional, and federal regulations. Hazard(s) Not Otherwise Not available. Classified (HNOC) Physical Hazards Not Not available Otherwise Classified (PHNOC) Unknown acute toxicity Not available.
2.1 Classification of the substance or mixture
This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200), WHMIS 2015 and GHS Regulations. Acute toxicity - Inhalation Category 4 Skin corrosion/irritation Category 2 Serious eye damage/eye irritation Category 2A Respiratory sensitization Category 1 Skin sensitization Category 1 Carcinogenicity Category 2 Specific target organ toxicity (single exposure) Category 3 Specific target organ toxicity (repeated exposure) Category 2 Symbol Signal word DANGER Hazard statements H332 - Harmful if inhaled H315 - Causes skin irritation H319 - Causes serious eye irritation H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled H317 - May cause an allergic skin reaction H351 - Suspected of causing cancer H335 - May cause respiratory irritation H373 - May cause damage to organs through prolonged or repeated exposure