Note: Ingredients listed on restricted chemical lists
EC/CAS
106-97-8
Name of the chemical
n-Butan, enthält 0,1% Butadien
Concentration
N/A
EC/CAS
108-10-1
Name of the chemical
4-methylpentan-2-one; isobutyl methyl ketone (MIBK)
Concentration
N/A
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
N/A
General Information
Revision date
2012-06-14
Product name
Gotta Grip Gray
1.2.1 Relevant identified uses
Coating
supplier name
Drummond, A Lawson Brand
Icons in SDS
Company Information
company name
Lawson Products, Inc
Section 2
SECTION 2: Hazards identification
Notes to physician Symptoms of poisoning may not appear for several hours. Keep under medical supervision for at least Emergency Overview Irritant. Extremely flammable. 48 hours. 5. FIRE FIGHTING MEASURES
Medical Conditions Generally Aggravated by Exposure
Reports have associated prolonged overexposure to solvents with permanent brain and nervous system damage Flash point °C -19 Flash point °F -2
Principle Routes of Exposure
Eyes. Inhalation Method Closed cup Autoignition temperature °C 365
Potential health effects
Eyes Irritation. Swelling. Skin Skin Irritation. Inhalation May cause irritation of the nose and throat. Dizziness. Headaches. Fatigue. Nausea. Central nervous system effects. Prolonged overexposure may cause. Kidney damage. Lung damage. Liver damage. Damage to blood . Repeated and prolonged exposure to solvents may cause brain and nervous system damage. Misuse by deliberately concentrating vapors and inhaling contents can be harmful or fatal. Ingestion Harmful or fatal if swallowed Autoignition temperature °F 689 Flammability Limits (% in Air) Upper 10.9 Lower 1.7 Suitable extinguishing media Carbon dioxide (CO2). Water spray. Alcohol-resistant foam . Sand. Special protective equipment for firefighters As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear Fire and Explosion Hazards Extremely flammable. Aerosol containers may vent, rupture or burst when heated to temperatures above 120°F. Vapors may form explosive mixture in air between upper and lower explosive limits which can be ignited by many sources, such as pilot lights, open flames, electrical motors and switches. Empty containers contain residue and/or vapors. Do not weld, cut, pressurize, braze, solder, drill, grind, or expose such containers to