Lawn-Boy Generation II, 2 Cycle Oil

Health hazards

Major Routes of Ingredients Considered

Potential health effects

Exposure: Hazardous to Health Inhalation X

Contains

Petroleum Distillates Inhalation. At elevated temperatures or in Skin X Harmful if swallowed - Can enter lungs enclosed spaces, product mist or vapors may Ingestion and cause damage. If swallowed, DO irritate the mucous membranes of the nose, the Eye X NOT induce vomiting. Call a physician throat, bronchi, and lungs. immediately.

Potential chronic health

Summary Skin contact This product can cause mild, Target Organs May Prolonged and/or repeated skin contact transient skin irritation. The severity of irritation cause damage to the may cause irritation and inflamation. will depend on the amount of material that is following organs: upper Symptoms include defatting, redness, applied to the skin and the speed and respiratory tract, skin, dryness, blistering eczema-like lesions, thoroughness that it is removed. Symptoms eye, lens or cornea scaly dermatitis, and/or more serious skin include redness, itching, and burning of the skin. disorders. Chronic effects of ingestion Repeated or prolonged skin contact can produce and subsequent aspiration into the lungs moderate irritation (dermatitis). may cause pneumatocele (lung cavity) formation and chronic lung dysfunction. Conditions Aggravated by Exposure Eye contact:. This product can cause transient Disorders of the following organs or mild eye irritation with short-term contact with organ systems that may be aggravated liquid sprays or mists. Symptoms include stinging, by significant exposure to this material or watering, redness, and swelling. its components include: Skin, Respiratory System, Liver, Kidneys, Central Nervous System (CNS) Carcinogenic Potential This product Ingestion: If swallowed, large volumes of material is not known to contain any components can cause generalized depression, headache, at concentrations above 0.1% which drowsiness, nausea, vomiting and diarrhea. are considered carcinogenic by OSHA, Smaller doses can cause a laxative effect. If IARC or NTP. aspirated into the lungs, liquid can cause lung damage. First Aid Measures Personal Protection Inhalation: Move victim to fresh air. If victim is not Engineering Controls breathing, immediately begin rescue breathing. If Provide exhaust ventilation or other engineering controls to breathing is difficult, 100 percent humidified oxygen keep the airborne concentrations of mists and/or vapors should be administered by a qualified individual. Seek below the recommended exposure limits (see below). An medical attention immediately. Keep the affected eye wash station and safety shower should be located near individual warm and at rest. the work-station. Eye Contact: Check for and remove contact lenses. Personal Protective Equipment: Personal protective Flush eyes with cool, clean, low-pressure water while equipment should be selected based upon the conditions occasionally lifting and lowering eyelids. Seek medical under which this material is used. A hazard assessment of attention if excessive tearing, redness, or pain persists. the work area for PPE requirements should be conducted by Skin Contact: If burned by hot material, cool skin by a qualified professional pursuant to OSHA regulations.. For quenching with large amounts of cool water. For contact certain operations, additional PPE may be required. with product at ambient temperatures, remove Eye Protection: Safety glasses equipped with side shields contaminated shoes and clothing. Wipe off excess are recommended as minimum protection in industrial material. Wash exposed skin with mild soap and water. settings. Wear goggles if splashing or spraying is Seek medical attention if tissue appears damaged or if anticipated. Wear goggles and face shield if material is pain or irritation persists. Thoroughly clean contaminated heated above 125°F (51°C). Have suitable eye wash water clothing before reuse. Clean or discard contaminated available. leather goods. If material is injected under the skin, seek Hand Protection: Avoid skin contact. Use heavy duty medical attention immediately. gloves constructed of chemical resistant materials such Ingestion: Do not induce vomiting unless directed to by a as Viton® or heavy nitrile rubber. Wash hands with plenty of physician. Do not give anything to drink unless mild soap and water before eating, drinking, smoking, use of directed to by a physician. Never give anything by mouth toilet facilities or leaving work. DO NOT use gasoline, to a person who is not fully conscious. If significant kerosene, solvents or harsh abrasives as skin cleaners. amounts are swallowed or irritation or discomfort occurs, Body Protection: Use clean protective clothing if splashing seek medical attention immediately. or spraying conditions are present. Protective clothing may Notes to Physician INGESTION The viscosity range of include long-sleeve outer garment, apron, or lab coat. If the product(s) represented by this MSDS is greater than significant contact occurs, remove oil-contaminated clothing 100 SUS at 100°F. Careful gastric lavage may be as soon as possible and promptly shower. Launder considered to evacuate large quantities of material contaminated clothing before reuse or discard. Wear heat protective boots and protective clothing when handling material at elevated temperatures. Respiratory Protection: The need for respiratory protection is not anticipated under normal use conditions and with adequate ventilation. If elevated airborne concentrations above applicable workplace exposure levels are anticipated, a NIOSH-approved organic vapor respirator equipped with adust/mist prefilter should be used. Protection factors vary depending upon the type of respirator used. Respirators should be used in accordance with OSHA requirements (29CFR 1910.134). General Comments: Use good personal hygiene practices. Wash hands and other exposed skin areas with plenty of mild soap and water before eating, drinking, smoking, use of toilet facilities, or leaving work. DO NOT use gasoline, kerosene, solvents or harsh abrasives as skin cleaners. Since specific exposure standards/control limits have not been established for this product, the "Oil Mist, Mineral" exposure limits shown below are suggested as minimum control guidelines. Fire and Explosion Hazards Extinguishing Media Special Fire Fighting Unusual Fire and Explosion Hazards Procedures SMALL FIRE: Use dry chemicals, Firefighters must use full bunker NFPA Class-IIIA combustible liquid. carbon dioxide, foam, or inert gas gear including NIOSH-approved Flash Point Closed cup 71°C (160°F) (nitrogen). Carbon dioxide and positive pressure (Pensky-Martens.) Open cup: 94°C (201°F) inert gas can displace oxygen. Use self-contained breathing apparatus (Cleveland.). caution when applying carbon to protect against potential Lower Flammable Limit: No data. dioxide or inert gas in confined hazardous combustion or Upper Flammable Limit: No data spaces. decomposition products and oxygen Autoignition Temperature: Not available. LARGE FIRE: Use foam, water deficiencies. Withdraw immediately Hazardous Combustion Products: fog, or water spray. Water fog and from the area if Carbon dioxide, carbon monoxide, smoke, spray are effective in cooling there is a rising sound from a fumes, unburned hydrocarbons and oxides containers and adjacent structures. venting safety device or of sulfur and/or nitrogen. However, water can cause frothing discoloration of vessels, tanks, or Special Properties: This material will and/or may not extinguish the fire. pipelines. release vapors when heated above the Water can be used to cool the flash point temperature that can ignite when external walls of vessels to prevent exposed to a source of ignition. In enclosed excessive pressure, autoignition or spaces, vapors can ignite with explosive explosion. DO NOT use a solid force. Mists or sprays may burn at stream of water directly on the fire temperatures below the flash point. as the water may spread the fire to a larger area. Handling and Storage