Note: Ingredients listed on restricted chemical lists
EC/CAS
236-675-5/13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
<10
General Information
Version
1.1
Revision date
2020-07-15
Product name
LAMILUXPlan Coils and sheet Mould material consisting of unsaturated polyester resin, vinylester resin and glass fibers
Product name
LAMILUXPlan Coils and sheet Mould material consisting of unsaturated polyester resin, vinylester resin and glass fibers
Identification on the label/Trade name
LAMILUXPlan Coils and sheet Mould material consisting of unsaturated
1.2.1 Relevant identified uses
Article categories [AC]
Emergency telephone
+49 9283 595-224
Icons in SDS
Company Information
company name
LAMILUX Composites GmbH
e-mail address of the competent person responsible for the Safety Data Sheet
information@lamilux.de, marcus.seitz@lamilux.de
Section 2
Additional information
This article doesn't contain hazardous substances or mixtures intended to be released under normal or reasonably foreseeable conditions of use. There is no requirement for the product to be specially labelled according to EC directives or the corresponding national laws.
2.2 Label elements
Labelling
Other physicochemical hazards
No risks worthy of mention.
Potential health effects
Exposure to dust in excess of TLV (Treshhold Limit Value) may result in skin or upper respiratory tract irritation. Pre-existing skin or respiratory disorders may cause more susceptibility to these effects.
Environmental effects
No risks worthy of mention.
Other hazards
Dust can create potentially explosive mixtures of dust and air. In case of mechanical processing protection measures are to be taken with regard to dust generation. Fine particles may possibilty short time irritate the eyes, skin and respiratory tract.
