Note: Ingredients listed on restricted chemical lists
EC/CAS
1305-62-0
Name of the chemical
Calcium dihydroxide
Concentration
N/A
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
N/A
EC/CAS
238-878-4
Name of the chemical
Quarz-A-Staub (s. u. TRGS 906)
Concentration
N/A
General Information
Product name
EWI-061 Fin Plast
supplier name
KREISEL - Technika Budowlana Sp. z o.o
Icons in SDS
Company Information
company name
KREISEL - Technika Budowlana Sp. z o.o
e-mail address of the competent person responsible for the Safety Data Sheet
Bartosz.Polaczyk@kreisel.pl, poznan@kreisel.pl, info@ewipro.com, Jaroslaw.Bialecki@kreisel.pl
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H318
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
Regulation (EC) No. 1272/2008 2
CLP CLASSIFICATION
GHS05 corrosion GHS07 WARNING Eye Dam. 1 H318 Causes serious eye damage. Skin Irrit. 2 H315 Causes skin irritation. Skin Sens. 1 H317 May cause an allergic skin reaction.
Additional information
The classification in terms of skin and eye irritation is based on the results of animal studies, see section 16 literature [4], [11] and [12].
2.2 Label elements
Labelling according to Regulation (EC) No 1272/2008 The product is classified and labelled according to the CLP regulation.
Hazard pictograms
GHS05 GHS07
Signal word
Danger
Hazard statements
H315 Causes skin irritation.
Hazardous Ingredients
H318 Causes serious eye damage. Portland cement clinker H317 May cause an allergic skin reaction.
Precautionary statements
P102 - Keep out of reach of children. P261 - Avoid breathing dust. P280 Wear protective gloves/protective clothing/eye protection/face protection. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if possible and easy to do. Continue rinsing. P315 Seek immediate medical advice/attention. P302+P352 IF ON SKIN: Wash with plenty of soap and water. For further information, contact: P332+P313 If skin irritation occurs: Seek medical advice/attention. Bartosz Polaczyk (On working days 8 a.m. - 4 p.m.) P362+P364 Take off contaminated clothing and wash it before re-use. Tel.: +48(0)510 022 908, +48/(0)61 - 84 P501 Dispose of contents/container to appropriate waste collection point. 67 966, Bartosz.Polaczyk@kreisel.pl Unique Formula Identifier (UFI-Code) according to Regulation (EC) No 542/2017 Jarosław Białecki (On working days 8 a.m. - 4 p.m.) MMD1-20FR-6008-VYM3 Tel.: +48/(0)509 553 378, +48/(0)44 - 726 16 65, Jaroslaw.Bialecki@kreisel.pl
2.3 Other hazards
As soon as the dry mixture comes into contact with water or humidity, a strongly alkaline solution will be formed. Wet mortar may cause skin and eye irritation due to its high alkalinity. Prolonged contact (e.g. knees in wet mortar) increases the risk of serious skin damage due to the alkalinity. The amount of respirable, cristaline siliciumdioxide is below 1%. The product is not subject to a declaration obligation, however, the use of breathing protection is advisable. Dust from the dry mixture can cause respiratory irritation. Frequent inhalation of large amounts of dust increases the risk of developing lung diseases. The mixture is chromate reduced and therefore, there is no risk of sensitisation by chromate. The ready-to-use product (after the addition of water) contains a maximum 0,0002% of soluble chromium(VI) based on the dry weight of the cement. Proper dry storage and compliance with the maximum storage time is required for an effective chromate reduction.
PBT Substances
Not applicable. vPvB Not applicable Fin Plast EWI-061 3