Note: Ingredients listed on restricted chemical lists
EC/CAS
2530-83-8
Name of the chemical
[3-(2,3-epoxypropoxy)propyl]trimethoxy silane
Concentration
N/A
General Information
Revision date
2016-05-11
Product name
CILBOND 33 A
1.2.1 Relevant identified uses
Adhesives
Icons in SDS
Company Information
company name
Kommerling UK Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
sds@cilbond.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H225, H318, H336
Hazard statements
Code
Statements
H225
Highly Flammable liquid and vapour
Section 2
2.1 Classification of the substance or mixture
Flam. Liq. 2 H225 Highly flammable liquid and vapor. Eye Dam. 1 H318 Causes serious eye damage. STOT SE 3 H336 May cause drowsiness or dizziness.
2.2 Label elements
The product is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms
GHS02 GHS05 GHS07
Signal word
Danger
Hazardous Ingredients
3-(2,3-epoxypropoxy)propyl]trimethoxysilane butanone
Hazard statements
H225 Highly flammable liquid and vapor. H318 Causes serious eye damage. H336 May cause drowsiness or dizziness.
Precautionary statements
Keep away from heat/sparks/open flames/hot surfaces. No smoking. Keep container tightly closed. Take precautionary measures against static discharge. Avoid breathing mist/vapours/spray. Use only outdoors or in a well-ventilated area. Wear protective gloves / eye protection. Ground/bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting/equipment. Use only non-sparking tools. If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell. If eye irritation persists: Get medical advice/attention. Do NOT induce vomiting. In case of fire Use for extinction CO2, powder or water spray Store in a well-ventilated place. Keep container tightly closed. Dispose of contents/container in accordance with local/regional/national/international regulations.
2.3 Other hazards
In the event of a large-scale use of the product, ignition sources in the immediate proximity and in low-lying areas, such as welding equipment, bells, heating elements, refrigerators, storage heaters etc. should be switched off! Erect warning signs warning of the hazardous risk of explosive atmosphere!
PBT Substances
Not applicable
vPvB Substances
Not applicable
