Note: Ingredients listed on restricted chemical lists
EC/CAS
7757-83-7
Name of the chemical
Sodium sulphite
Concentration
N/A
EC/CAS
7681-57-4
Name of the chemical
Sodium metabisulfite
Concentration
N/A
General Information
Revision date
2014-02-07
Product name
KODAK XTOL Developer, Part B
Product Synonyms
PCD 6327
1.2.1 Relevant identified uses
photographic processing chemical (developer/activator). For industrial use only
supplier name
Kodak Alaris Inc.
Icons in SDS
Company Information
company name
Kodak Alaris Inc.
e-mail address of the competent person responsible for the Safety Data Sheet
EHS-Questions@Kodakalaris.com
GHS Information
Signal word
Danger
Section 2
SECTION 2: Hazards identification
Classification of the chemical in accordance with paragraph (d) of 29 CFR 1910.1200: Classification of the chemical in accordance with paragraph (d) of 29 CFR 1910.1200:
Principle Routes of Exposure
Acute toxicity Category 4 Inhalation Acute toxicity Category 4 Oral Acute toxicity Category 4 Dermal Skin corrosion/irritation Category 2 -- Serious eye damage Category 1 --
Contains
Sodium sulphite (7757-83-7), Sodium metabisulphite (7681-57-4)
Signal word
Danger
Hazard statements
Harmful if inhaled. Harmful if swallowed. Harmful in contact with skin. Causes skin irritation. Causes serious eye damage.
Prevention
Use only outdoors or in a well-ventilated area. Wear protective gloves/ protective clothing/ eye protection/ face protection. Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray. Wash thoroughly after handling. Do not eat, drink or smoke when using this product.
Response
IF INHALED Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or doctor/ physician if you feel unwell. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/ physician. IF ON SKIN: Wash with plenty of soap and water. If skin irritation occurs: Get medical advice/ attention. Wash contaminated clothing before reuse. IF SWALLOWED: Call a POISON CENTER or doctor/ physician if you feel unwell. Rinse mouth.
Storage
Store in a well-ventilated place. Keep cool
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulation.
Other hazards which do not result in classification
Powdered material may form explosive dust-air mixtures. HMIS III Hazard Ratings: Health - 1, Flammability - 1, Physical Hazard - 0 NFPA Hazard Ratings: Health - 3, Flammability - 1, Instability - 0 NOTE: HMIS III and NFPA 704 (2007) hazard indexes involve data review and interpretation that may vary among companies. They are intended only for rapid, general identification of the magnitude of the potential hazards. To adequately address safe handling, ALL information in this MSDS must be considered.
