KODAK FLEXICOLOR SM Processing Unit F1/C41SM, Part 3

Kodak Alaris Inc.

Revision date : 2015-02-20

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS05 GHS07
Health risk rating 5
Safety risk rating 5
Environmental risk rating 5

Note: Ingredients listed on restricted chemical lists

EC/CAS

10117-38-1

Name of the chemical

Potassium sulphite

Concentration

N/A

EC/CAS

140-01-2

Name of the chemical

Pentanatrium-(carboxylatomethyl)-iminobis(ethylennitrilo)-tetraacetat (2022/692)

Concentration

N/A

EC/CAS

7757-83-7

Name of the chemical

Sodium sulphite

Concentration

N/A

EC/CAS

1310-58-3

Name of the chemical

potassium hydroxide

Concentration

N/A

General Information

Revision date

2015-02-20

Product name

KODAK FLEXICOLOR SM Processing Unit F1/C41SM, Part 3

Product Synonyms

PCD 6310

1.2.1 Relevant identified uses

photographic processing chemical. For industrial use only

supplier name

Kodak Alaris Inc.

Emergency telephone

1-800-424-9300 or +1 703-527-3887

Icons in SDS

Company Information

company name

Kodak Alaris Inc.

e-mail address of the competent person responsible for the Safety Data Sheet

EHS-Questions@Kodakalaris.com

GHS Information

Signal word

Danger

Section 2

SECTION 2: Hazards identification

Classification of the chemical in accordance with paragraph (d) of 29 CFR 1910.1200: Classification of the chemical in accordance with paragraph (d) of 29 CFR 1910.1200:

Principle Routes of Exposure

Corrosive to metals Category 1 -- Skin corrosion Category 2 -- Serious eye damage Category 1 -- Specific target organ toxicity - Category 3 -- single exposure

Contains

Potassium carbonate (584-08-7), Potassium sulphite (10117-38-1), Sodium sulphite (7757-83-7), Potassium hydroxide (1310-58-3)

Signal word

Danger

Hazard statements

May be corrosive to metals. Causes skin irritation. Causes serious eye damage May cause respiratory irritation.

Prevention

Keep only in original container. Use only outdoors or in a well-ventilated area. Wear protective gloves/ eye protection/ face protection. Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray. Wash thoroughly after handling.

Response

IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/ physician. IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. IF ON SKIN Wash with plenty of soap and water. If skin irritation occurs Get medical advice/ attention. Take off contaminated clothing and wash before reuse. Absorb spillage to prevent material damage.

Storage

Store in a well-ventilated place. Keep container tightly closed. Store in corrosive resistant container with resistant inliner.

Disposal

Dispose of contents/container in accordance with local/regional/national/international regulation. HMIS III Hazard Ratings: Health - 3, Flammability - 0, Physical Hazard - 0 NFPA Hazard Ratings: Health - 3, Flammability - 0, Instability - 0 NOTE: HMIS III and NFPA 704 (2007) hazard indexes involve data review and interpretation that may vary among companies. They are intended only for rapid, general identification of the magnitude of the potential hazards. To adequately address safe handling, ALL information in this MSDS must be considered.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.