Note: Ingredients listed on restricted chemical lists
EC/CAS
200-751-6/71-36-3
Name of the chemical
1-butanol
Concentration
1-<2.5%
General Information
Version
8 (Replaced 7
Revision date
2022-07-22
Product name
Epoxy enamel EPOMID E3200
1.2.1 Relevant identified uses
it is used to protect the surfaces of ceramic sanitary objects (bathtubs, sinks, etc.) and bathtubs cast iron. For
1.2.2. Uses advised against
professional use only
Icons in SDS
Company Information
company name
KOBER SRL
e-mail address of the competent person responsible for the Safety Data Sheet
OFFICE@KOBER.RO
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H226, H315, H317, H319, H332
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
Regulation (EC) No. 1272/2008 Classification of the substance or mixture
Hazard statements
Acute Tox. 4: H332 - Harmful if inhaled. Eye Irrit. 2: H319 - Causes serious eye irritation. Flam. Liq. 3: H226 - Flammable liquid and vapour. Skin Irrit. 2: H315 - Causes skin irritation. Skin Sens. 1: H317 - May cause an allergic skin reaction.
Precautionary statements
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P280: Wear protective gloves/protective clothing/respiratory protection/eye protection/protective footwear. P302+P352 IF ON SKIN Wash with plenty of water P304+P340 IF INHALED Remove person to fresh air and keep comfortable for breathing P305+P351+P338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do Continue rinsing. P370+P378 In case of fire Use ABC powder extinguisher to extinguish P501: Dispose of contents/container in accordance with regulations on hazardous waste or packaging and packaging waste respectively.
Supplemental label elements
EUH211: Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.
Hazardous Ingredients
4,4’-Is opropylidene-diphenol, polymer reaction products with cu 1-chloro-2,3-epoxypropaneaverage molecular mass: 850-1150; Xylene ** Changes with regards to the previous version E3200 ** (continued)
2.3 Other hazards
This mixture does not contain components considered to be either persistent, bioaccumulative and toxic (PBT) or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. Ecological information: The mixture does not contain components considered to have properties that may cause endocrine disruption, in accordance with Article 57(f) of the Regulation REACH or Commission Delegated Regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at concentrations of 0.1% or higher. Toxicological information:The substance/preparation does not contain components considered to have properties that may cause endocrine disruption, in accordance with Article 57(f) of REACH Regulation or Commission Delegated Regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at concentrations of 0.1% or higher.
2.1 Classification of the substance or mixture
CLP Regulation (EC) No 1272/2008: Classification of this product has been carried out in accordance with CLP Regulation (EC) No 1272/2008. Acute Tox. 4: Acute inhalation toxicity, Category 4, H332 Eye Irrit. 2: Eye irritation, Category 2, H319 Flam. Liq. 3: Flammable liquids, Category 3, H226 Skin Irrit. 2: Skin irritation, Category 2, H315 Skin Sens. 1: Sensitisation, skin, Category 1, H317