Note: Ingredients listed on restricted chemical lists
EC/CAS
16871-90-2
Name of the chemical
Dipotassium hexafluorosilicate
Concentration
N/A
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
N/A
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
N/A
EC/CAS
231-072-3
Name of the chemical
Aluminium
Concentration
N/A
EC/CAS
238-878-4
Name of the chemical
Quarz-A-Staub (s. u. TRGS 906)
Concentration
N/A
EC/CAS
240-896-2
Name of the chemical
Dipotassium hexafluorosilicate
Concentration
N/A
EC/CAS
236-675-5
Name of the chemical
Titandioxid; [in Pulverform mit mindestens 1 % Partikel mit aerodynamischem Durchmesser ≤ 10 μm] (2020/217)
Concentration
N/A
General Information
Revision date
2021-06-30
Product name
DW-A55S
REACH No
not
1.2.1 Relevant identified uses
Specific process or activity
Icons in SDS
Company Information
company name
Kobelco Welding of Europe B.V
e-mail address of the competent person responsible for the Safety Data Sheet
info@kobelcowelding.nl
GHS Information
Signal word
Warning!
Section 2
CLP CLASSIFICATION
This mixture does not meet the criteria for classification in accordance with Regulation No 1272/2008/EC. It has been observed that the carcinogenic hazard of this substance arises when respirable dust is inhaled in quantities leading to significant impairment of particle clearance mechanisms in the lung. Code
Supplemental label elements
EUH210 safety data sheet available on request EUH212 Warning! Hazardous respirable dust may be formed when used. Do not breathe dust EUH210 Safety data sheet available on request. EUH212 Warning! Hazardous respirable dust may be formed when used. Do not breathe dust.
2.2 Label elements
Labelling according to Regulation (EC) No 1272/2008 (CLP)
Signal word
Not required.
Hazard pictograms
Not required.
2.3 Other hazards
There is no additional information. Avoid breathing dust. Avoid contact with eyes. Avoid skin contact. When this product is used in a welding process, the most significant hazards are electric shock, fumes, gases, radiation, spatter, slag and heat. Shock: electric shock can kill. Fumes: Overexposure to welding fumes may result in symptoms like dizziness, nausea, dryness or irritation of the nose, throat or eyes. Chronic overexposure to welding fumes may affect pulmonary function and nervous system. Gases: gases may cause gas poisoning. Radiation: arc rays can severely damage eyes or skin. Spatter, slag and heat: spatter and slag can damage eyes. Spatter, slag, melting material, arc rays and hot welds can cause burn injuries and start fires. Substance(s) formed under the conditions of use. The welding fumes produced from this welding electrode may contain the listed constituent(s) of Sec.3 and/or their complex metallic oxides as well as solid particles or other constituents from the consumables, base metal, or base metal coating not listed Sec.3. The welding fumes may contain Mn, Ni, Cr(VI) and their compounds. Refer to Sec.8 and 10.
Results of PBT and vPvB assessment
This mixture does not contain any substances that are assessed to be a PBT or a vPvB.
