General Information
Revision date
2024-02-16
Product name
AQUAMASTER 25 KG
1.2.1 Relevant identified uses
Cement-based adhesive mortar
1.2.2. Uses advised against
All uses other than recommended ones
Emergency telephone
(+357)1401
Icons in SDS
Company Information
company name
KNAUF CYPRUS LTD
e-mail address of the competent person responsible for the Safety Data Sheet
knauf-cy@knauf.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H318, H335
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
Adverse physicochemical, human health and environmental effects
No other hazards
Hazard statements
H315 Causes skin irritation. H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H335 May cause respiratory irritation.
Precautionary statements
P102 Keep out of reach of children. P260 Do not breathe dust. P280 Wear protective gloves and eye protection. P302+P352 IF ON SKIN: Wash with plenty of water. P305+P351+P33 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy 8 to do. Continue rinsing. P501 Dispose of contents/container in accordance with applicable regulations.
Contains
Portland Cement (Cr VI < 0,0002%)
Annex XVII - Restrictions on the manufacture, placing on the market and use of certain dangerous substances, mixtures and articles
None.
2.3 Other hazards
When mixtures containing cement react with water, for instance when making concrete or mortar, or when the cement becomes wet, a strong alkaline solution is produced (high pH caused by the formation of calcium, sodium and potassium hydroxides). Cement and mixtures containing cement may irritate the eyes, the mucous system, the throat and the respiratory system and cause coughing. Frequent inhalation of cement dust or mixtures containing cement over a long period of time increases the risk of developing lung diseases. In case of prolonged contact with the skin, both cement and mixtures containing cement, including pastes, may cause skin sensitisation due to the presence of trace amounts of chromium VI salts. Where necessary, such an effect can be minimized by incorporating a special reducing agent to maintain the water-soluble chromium VI content to concentration rates below 0.0002% (2 ppm) on the total dry weight of cement. No PBT, vPvB or endocrine disruptor substances present in concentration >= 0.1% Prolonged exposition and/or intensive inhalation of respirable free crystalline silica can cause pulmonary fibrosis commonly referred to as silicosis.