Note: Ingredients listed on restricted chemical lists
EC/CAS
231-111-4/7440-02-0
Name of the chemical
Nickel
Concentration
N/A
EC/CAS
231-159-6/7440-50-8
Name of the chemical
Copper
Concentration
N/A
EC/CAS
231-157-5/7440-47-3
Name of the chemical
Chromium; chromic acid and its salts
Concentration
N/A
EC/CAS
231-176-9/7440-67-7
Name of the chemical
Zirconium and its compounds, with the exception of the substances listed under reference number 50 in Annex III, and the zirconium lakes, pigments or salts of the colouring agents when listed in Annex IV
Concentration
N/A
General Information
Revision date
2015-06-18
Product name
CH-CuNiSi_Information_sheet_article_20150618
1.2.1 Relevant identified uses
Articles from copper alloy like tubes, rods, plates, sheets (blank or coated), coins and other semi- finished products in massive form
Icons in SDS
Company Information
company name
KME Brass Italy S.r.l
e-mail address of the competent person responsible for the Safety Data Sheet
emiliano.micalizio@kme.com, Philippe.Marchal@kme.com, laura.sanchez@kme.com, Frank.Otten@kme.com
Section 2
SECTION 2: Hazards identification
When supplied in solid form the articles from copper and copper alloys are nonhazardous. If they are subsequently processed in any way which might produce airborne dust or fumes, for instance by dry grinding, abrading, electro discharge machining, melting or welding (the material itself) then an inhala- tion hazard could arise. General handling, stamping, forming and most machining operations are nonhazardous. Heat treat- ment in air up to about 400 °C is non-hazardous but higher temperatures may give rise to loss of ox- ide, which could cause hazardous inhalation. This can be avoided by treatment in inert atmosphere.
