PS220 - Solvent-based 100% Silicone 69% Solids Elastomeric Roof Coating (FR)

KM Coatings Mfg

Revision date : 2017-11-16

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS02 GHS07 GHS08
Health risk rating 4
Safety risk rating 2
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

14808-60-7

Name of the chemical

Silica, crystalline

Concentration

30-35%

EC/CAS

13463-67-7

Name of the chemical

Reaction mass of titanium dioxide and silver chloride

Concentration

5-10

General Information

Revision date

2017-11-16

Product name

PS220 - Solvent-based 100% Silicone 69% Solids Elastomeric Roof Coating (FR)

1.2.1 Relevant identified uses

Silicone Roof Coating

Manufacturer Name

KM Coatings Mfg

Emergency telephone

(800) 424-9300

Icons in SDS

GHS02 GHS07 GHS08

Company Information

company name

KM Coatings Mfg

GHS Information

Signal word

Danger!

Hazard Codes

Hazard statements (CLP)

H226, H304, H315, H317, H336

Hazard statements

Code

Statements

H226

Flammable liquid and vapour

Section 2

SECTION 2: Hazards identification

Physical Health Flammable Liquid Category 3

Aspiration hazard

Category 1 Skin Irritation Category 2 Skin Sensitization Category 1B Specific Target Organ Toxicity – Single Exposure Category 3 (CNS) Specific Target Organ Toxicity – Repeated Exposure Category 2

2.2 Label elements

Danger! Flammable Liquid and vapor. May be fatal if swallowed and enters airways. Causes skin irritation. May cause an allergic skin reaction. May cause drowsiness or dizziness. May cause damage to blood through prolonged or repeated exposure by ingestion. Keep away from heat, sparks, open flames, and hot surfaces. No smoking. Keep container tightly closed. Ground and bond container and receiving equipment Use explosion-proof electrical, ventilating and lighting equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Do not breathe mist, vapors or spray. Wash thoroughly after handling. Use only outdoors or in a well-ventilated area. Contaminated work clothing must not be allowed out of the workplace. Wear protective gloves, eye protection and face protection. IF SWALLOWED: Immediately call a POISON CENTER or doctor. Do NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. If skin irritation or rash occurs: Get medical attention. Wash contaminated clothing before reuse. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell. Get medical attention if you feel unwell. In case of fire: Use foam, dry chemical, carbon dioxide or water to extinguish. Store in a well-ventilated place. Keep cool. Keep container tightly closed. Store locked up. Dispose of contents and container in accordance with local and national regulations.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.