Note: Ingredients listed on restricted chemical lists
EC/CAS
238-878-4/14808-60-7
Name of the chemical
Silica, crystalline
Concentration
10-20%
EC/CAS
236-675-5/13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
5-10% 00-2
EC/CAS
213-048-4/919-30-2
Name of the chemical
3-aminopropyltriethoxysilane
Concentration
2.5-5% 00-0
General Information
Revision date
2022-06-24
Product name
KM PS 250.2 - HIGH SOLIDS SILICONE ROOF COATING
1.2.1 Relevant identified uses
Coating
Emergency telephone
(800) 424-9300
Icons in SDS
Company Information
company name
KM Coatings Mfg
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H302, H315, H317, H318, H373
Hazard statements
Code
Statements
H302
Harmful if swallowed
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
Skin irritation, Category 2 Causes skin irritation. Serious eye damage, Category 1 Causes serious eye damage. Skin Sensitization, Category 1B May cause an allergic skin reaction. Acute toxicity (oral), Category 4 Harmful if swallowed. Specific target organ toxicity following repeated exposure, May cause damage to organs through prolonged or repeated Category 2 exposure if inhaled, in contact with skin and if swallowed.
2.2 Label elements
Pictograms and Signal Words Danger
Hazard statements
H302 Harmful if swallowed. H315 Causes skin irritation. H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H373 May cause damage to organs through prolonged or repeated exposure if inhaled, in contact with skin and if swallowed.
Precautionary statements
P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P233 Keep container tightly closed. P260 Do not breathe mist/vapours/spray. P262 Do not get in eyes, on skin, or on clothing. P270 Do not eat, drink or smoke when using this product. P272 Contaminated work clothing must not be allowed out of the workplace. P273 Avoid release to the environment. P280 Wear protective gloves/protective clothing/eye protection/face protection. P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308+P313 IF exposed or concerned: Get medical advice/attention. P310 Immediately call a POISON CENTER. P314 Get medical advice/attention if you feel unwell. P321 Specific treatment (see supplementary instructions on this label) P333+P313 If skin irritation or rash occurs: Get medical advice/attention. P362+P364 Take off contaminated clothing and wash it before reuse. P403+P235 Store in a well-ventilated place. Keep cool. P405 Store locked up. P501 Dispose of contents/container in accordance with applicable regulations.
Ingredient(s) with unknown acute toxicity
None Hazards not otherwise classified identified during the classification process: None This product contains crystalline silica (quartz sand). IARC has classified crystalline silica as a Group 1 carcinogen. Both IARC and NTP consider silica as a known human carcinogen. Evidence is based on the chronic and long-term exposure workers have had to respirable sized crystalline silica dust particles. Because this product is in liquid or paste form, it does not pose a dust hazard; therefore, this classification is not relevant. (Note: sanding of the hardened product may create a silica dust hazard) This product contains titanium dioxide which IARC has classified as a Group 2B carcinogen (possibly carcinogenic to humans). Evidence is based on sufficient animal testing as a result of long-term inhalation at high concentrations of respirable amounts of titanium dioxide. Because this product is in liquid or paste form, it does not pose a dust hazard; therefore, this classification is not relevant. (Note: sanding of the hardened product may create a dust hazard)