Note: Ingredients listed on restricted chemical lists
EC/CAS
204-881-4/128-37-0
Name of the chemical
2,6-di-tert-butyl-p-cresol
Concentration
>=0.1-<0.25
EC/CAS
204-881-4/597-82-0
Name of the chemical
O,O,O-triphenyl phosphorothioate
Concentration
>=0.025-<0.1
EC/CAS
209-909-9
Name of the chemical
O,O,O-triphenyl phosphorothioate
Concentration
>=0.025-<0.1
General Information
Revision date
2025-11-21
Product name
W & H Service Oil F1 MD 500 STANDARD
1.2.1 Relevant identified uses
Lubricating oil
supplier name
Klüber Lubrication Great Britain Limited
Emergency telephone
+49 89 7876 700
Icons in SDS
Company Information
company name
Klüber Lubrication München GmbH & Co. KG
e-mail address of the competent person responsible for the Safety Data Sheet
info@klueber.com
Hazard Codes
Hazard statements (CLP)
H412
Hazard statements
Code
Statements
H412
Harmful to aquatic life with long lasting effects
Section 2
SECTION 2: Hazards identification
Regulation (EC) No. 1272/2008 Classification of the substance or mixture
Hazard statements
H412 Harmful to aquatic life with long lasting effects.
Prevention
P273 Avoid release to the environment.
2.3 Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
2.1 Classification of the substance or mixture
Classification (REGULATION (EC) No 1272/2008) as amended by GB-CLP Regulation, UK SI 2019/720, and UK SI 2020/1567) Long-term (chronic) aquatic hazard, H412: Harmful to aquatic life with long lasting Category 3 effects. 2.2 Label elements Labelling (REGULATION (EC) No 1272/2008) as amended by GB-CLP Regulation, UK SI 2019/720, and UK SI 2020/1567) Hazard statements : H412 Harmful to aquatic life with long lasting effects. Precautionary statements : Prevention: P273 Avoid release to the environment. 2.3 Other hazards This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. SECTION 3: Composition/information on ingredients 3.2 Mixtures Chemical nature : Synthetic hydrocarbon oil ester oil Components Chemical name CAS-No. Classification specific Concentration EC-No. concentration (% w/w) limit Index-No. M-Factor Registration number Notes Acute toxicity estimate Dec-1-ene, dimers, 68649-11-6 Acute Tox. 4; >= 1 - < 10 hydrogenated 500-228-5 H332 Asp. Tox. 1; H304 2,6-di-tert-butyl-p- 128-37-0 Aquatic Acute 1; >= 0.1 - < 0.25 cresol 204-881-4 H400 M-Factor: 1/1 Aquatic Chronic 1; H410 O,O,O-triphenyl 597-82-0 Aquatic Chronic 1; >= 0.025 - < 0.1 phosphorothioate 209-909-9 H410 M-Factor: /10 For explanation of abbreviations see section 16. SECTION 4: First aid measures 4.1 Description of first aid measures If inhaled : Remove person to fresh air. If signs/symptoms continue, get medical attention. Keep patient warm and at rest. If unconscious, place in recovery position and seek medical advice. Keep respiratory tract clear. If breathing is irregular or stopped, administer artificial respiration. In case of skin contact : Remove contaminated clothing. If irritation develops, get medical attention. In case of contact, immediately flush skin with plenty of water. Wash clothing before reuse. Thoroughly clean shoes before reuse. In case of eye contact : Rinse immediately with plenty of water, also under the eyelids, for at least 10 minutes. If eye irritation persists, consult a specialist. If swallowed : Move the victim to fresh air. If unconscious, place in recovery position and seek medical advice. Keep respiratory tract clear. Do NOT induce vomiting. Rinse mouth with water. Never give anything by mouth to an unconscious person. 4.2 Most important symptoms and effects, both acute and delayed Symptoms : No symptoms known or expected. 4.3 Indication of any immediate medical attention and special treatment needed Treatment : Treat symptomatically. SECTION 5: Firefighting measures 5.1 Extinguishing media Suitable extinguishing media : Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Unsuitable extinguishing : High volume water jet media 5.2 Special hazards arising from the substance or mixture Hazardous combustion : Carbon oxides products 5.3 Advice for firefighters Special protective equipment : In the event of fire, wear self-contained breathing apparatus. for firefighters Use personal protective equipment. Exposure to decomposition products may be a hazard to health. Further information : Standard procedure for chemical fires. Collect contaminated fire extinguishing water separately. This must not be discharged into drains. SECTION 6: Accidental release measures 6.1 Personal precautions, protective equipment and emergency procedures Personal precautions : Evacuate personnel to safe areas. Use personal protective equipment. Ensure adequate ventilation. Refer to protective measures listed in sections 7 and 8. 6.2 Environmental precautions Environmental precautions : Do not allow contact with soil, surface or ground water. Prevent further leakage or spillage if safe to do so. If the product contaminates rivers and lakes or drains inform respective authorities. 6.3 Methods and material for containment and cleaning up Methods for cleaning up : Contain spillage, and then collect with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations (see section 13). 6.4 Reference to other sections For personal protection see section 8. SECTION 7: Handling and storage 7.1 Precautions for safe handling Advice on safe handling : Avoid inhalation of vapour or mist. Avoid contact with skin and eyes. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. Wash hands and face before breaks and immediately after handling the product. Do not ingest. Do not repack. Do not re-use empty containers. These safety instructions also apply to empty packaging which may still contain product residues. Keep container closed when not in use. Hygiene measures : Wash face, hands and any exposed skin thoroughly after handling. 7.2 Conditions for safe storage, including any incompatibilities Requirements for storage : Store in original container. Keep container closed when not in areas and containers use. Keep in a dry, cool and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Store in accordance with the particular national regulations. Keep in properly labelled containers. 7.3 Specific end use(s) Specific use(s) : Specific instructions for handling, not required. SECTION 8: Exposure controls/personal protection 8.1 Control parameters Occupational Exposure Limits Components CAS-No. Value type (Form Control parameters Basis of exposure) 2,6-di-tert-butyl-p- 128-37-0 TWA 10 mg/m3 GB EH40 cresol (2005-04-06) Derived No Effect Level (DNEL) Substance name End Use Exposure routes Potential health Value effects Dec-1-ene, dimers, Industrial use Inhalation Acute systemic 60 mg/m3 hydrogenated effects 2,6-di-tert-butyl-p- Workers Inhalation Long-term systemic 1.76 mg/m3 cresol effects Workers Skin contact Long-term systemic 0.5 mg/kg effects O,O,O-triphenyl Workers Inhalation Long-term systemic 1.39 mg/m3 phosphorothioate effects Workers Skin contact Long-term systemic 0.4 mg/kg effects Predicted No Effect Concentration (PNEC) Substance name Environmental Compartment Value 2,6-di-tert-butyl-p-cresol Fresh water 0.199 µg/l Marine water 0.02 µg/l Intermittent use/release 1.99 µg/l Microbiological Activity in Sewage 0.017 mg/l Treatment Systems Fresh water sediment 0.458 mg/kg Marine sediment 0.046 mg/kg Soil 0.054 mg/kg O,O,O-triphenyl Fresh water 0.00017 mg/l phosphorothioate Marine water 0.000017 mg/l Fresh water sediment 3.47 mg/kg Marine sediment 0.347 mg/kg Soil 2.46 mg/kg 8.2 Exposure controls Engineering measures none Personal protective equipment Eye/face protection : Safety glasses with side-shields Hand protection Material : Nitrile rubber Break through time : > 10 min Protective index : Class 1 Remarks : For prolonged or repeated contact use protective gloves. The break through time depends amongst other things on the material, the thickness and the type of glove and therefore has to be measured for each case. Skin and body protection : Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place. Respiratory protection : Not required; except in case of aerosol formation. Filter type : Filter type A-P Protective measures : The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Environmental exposure controls Air : Should not be released into the environment. Exhaust air must be cleaned using approved equipment before returning it to the work place. Soil : Do not allow contact with soil, surface or ground water. The product should not be allowed to enter drains, water courses or the soil. Water : Do not allow contact with soil, surface or ground water. The product should not be allowed to enter drains, water courses or the soil. SECTION 9: Physical and chemical properties 9.1 Information on basic physical and chemical properties Appearance Physical state : liquid Colour : yellow Odour : characteristic Odour Threshold : No data available The data/values refer to the main component: pH : Not applicable Melting point/ range : No data available Boiling point/boiling range : No data available Flash point : > 200 °C Method: ISO 2592, open cup Evaporation rate : No data available Flammability : Flammability (solid, gas): Not applicable Upper explosion limit / Upper : No data available flammability limit Lower explosion limit / Lower : No data available flammability limit Vapour pressure : < 0.17 hPa (20 °C) Relative vapour density : No data available Relative density : 0.843 (20 °C) Reference substance: Water The value is calculated Density : 0.84 g/cm3 (20 °C) Bulk density : No data available Solubility(ies) Water solubility : insoluble Solubility in other solvents : No data available Partition coefficient: n- : No data available octanol/water Auto-ignition temperature : No data available Decomposition temperature