General Information
Revision date
2022-04-13
Product name
W & H Service Oil F1 MD 302
1.2.1 Relevant identified uses
Lubricating oil
supplier name
Material Compliance Management
Emergency telephone
+49 89 7876 700
Icons in SDS
Company Information
company name
Klüber Lubrication Great Britain Limited
e-mail address of the competent person responsible for the Safety Data Sheet
info@klueber.com
Section 2
SECTION 2: Hazards identification
Regulation (EC) No. 1272/2008 Classification of the substance or mixture
2.3 Other hazards
This mixture contains no substance considered to be persistent, bioaccumulating and toxic (PBT). This mixture contains no substance considered to be very persistent and very bioaccumulating
vPvB Substances
This substance/mixture contains no components considered to be either persistent, bioaccumula- tive and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
2.1 Classification of the substance or mixture
Classification (REGULATION (EC) No 1272/2008) as amended by GB-CLP Regulation, UK SI 2019/720, and UK SI 2020/1567) Not a hazardous substance or mixture. 2.2 Label elements Labelling (REGULATION (EC) No 1272/2008) as amended by GB-CLP Regulation, UK SI 2019/720, and UK SI 2020/1567) Not a hazardous substance or mixture. 2.3 Other hazards This mixture contains no substance considered to be persistent, bioaccumulating and toxic (PBT). This mixture contains no substance considered to be very persistent and very bioaccumulating (vPvB). This substance/mixture contains no components considered to be either persistent, bioaccumula- tive and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. SECTION 3: Composition/information on ingredients 3.2 Mixtures Chemical nature : Synthetic hydrocarbon oil ester oil Components Remarks : No hazardous ingredients SECTION 4: First aid measures 4.1 Description of first aid measures If inhaled : Remove person to fresh air. If signs/symptoms continue, get medical attention. Keep patient warm and at rest. If breathing is irregular or stopped, administer artificial respira- tion. In case of skin contact : Remove contaminated clothing. If irritation develops, get med- ical attention. In case of contact, immediately flush skin with plenty of water. In case of eye contact : Rinse immediately with plenty of water, also under the eyelids, for at least 10 minutes. If eye irritation persists, consult a specialist. If swallowed : Move the victim to fresh air. Do NOT induce vomiting. Rinse mouth with water. 4.2 Most important symptoms and effects, both acute and delayed Symptoms : No information available. Risks : None known. 4.3 Indication of any immediate medical attention and special treatment needed Treatment : No information available. SECTION 5: Firefighting measures 5.1 Extinguishing media Suitable extinguishing media : Use water spray, alcohol-resistant foam, dry chemical or car- bon dioxide. Unsuitable extinguishing : High volume water jet media 5.2 Special hazards arising from the substance or mixture Hazardous combustion prod- : Carbon oxides ucts 5.3 Advice for firefighters Special protective equipment : In the event of fire, wear self-contained breathing apparatus. for firefighters Use personal protective equipment. Exposure to decomposi- tion products may be a hazard to health. Further information : Standard procedure for chemical fires. SECTION 6: Accidental release measures 6.1 Personal precautions, protective equipment and emergency procedures Personal precautions : Evacuate personnel to safe areas. Use personal protective equipment. Refer to protective measures listed in sections 7 and 8. 6.2 Environmental precautions Environmental precautions : Try to prevent the material from entering drains or water courses. Prevent further leakage or spillage if safe to do so. Local authorities should be advised if significant spillages cannot be contained. 6.3 Methods and material for containment and cleaning up Methods for cleaning up : Contain spillage, and then collect with non-combustible ab- sorbent material, (e.g. sand, earth, diatomaceous earth, ver- miculite) and place in container for disposal according to local / national regulations (see section 13). 6.4 Reference to other sections For personal protection see section 8. SECTION 7: Handling and storage 7.1 Precautions for safe handling Advice on safe handling : For personal protection see section 8. Smoking, eating and drinking should be prohibited in the ap- plication area. Wash hands and face before breaks and immediately after handling the product. Hygiene measures : Wash face, hands and any exposed skin thoroughly after handling. 7.2 Conditions for safe storage, including any incompatibilities Requirements for storage : Store in original container. Keep container closed when not in areas and containers use. Keep in a dry, cool and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Store in accordance with the particular national regulations. Keep in properly labelled containers. 7.3 Specific end use(s) Specific use(s) : Specific instructions for handling, not required. SECTION 8: Exposure controls/personal protection 8.1 Control parameters Contains no substances with occupational exposure limit values. 8.2 Exposure controls Engineering measures none Personal protective equipment Eye protection : Safety glasses with side-shields Hand protection Material : Nitrile rubber Break through time : > 10 min Protective index : Class 1 Remarks : For prolonged or repeated contact use protective gloves. The break through time depends amongst other things on the material, the thickness and the type of glove and therefore has to be measured for each case. Respiratory protection : Not required; except in case of aerosol formation. Filter type : Filter type A-P Protective measures : The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Choose body protection in relation to its type, to the concen- tration and amount of dangerous substances, and to the spe- cific work-place. SECTION 9: Physical and chemical properties 9.1 Information on basic physical and chemical properties Appearance : liquid Colour : yellow Odour : characteristic Odour Threshold : No data available pH : Not applicable Melting point/range : No data available Boiling point/boiling range : No data available Flash point : > 200 °C Method: open cup Evaporation rate : No data available Flammability (solid, gas) : Not applicable Upper explosion limit / Upper : No data available flammability limit Lower explosion limit / Lower : No data available flammability limit Vapour pressure : < 0.001 hPa (20 °C) Relative vapour density : No data available Relative density : 0.846 (20 °C) Reference substance: Water The value is calculated Density : 0.85 g/cm3 (20 °C) Bulk density : Not applicable Solubility(ies) Water solubility : insoluble Solubility in other solvents : No data available Partition coefficient: n- : No data available octanol/water Auto-ignition temperature : No data available Decomposition temperature : No data available Viscosity Viscosity, dynamic : No data available Viscosity, kinematic : 25 mm2/s (40 °C) Explosive properties : Not explosive Oxidizing properties : No data available 9.2 Other information Sublimation point : Not applicable Self-ignition : No data available SECTION 10: Stability and reactivity 10.1 Reactivity No hazards to be specially mentioned. 10.2 Chemical stability Stable under normal conditions. 10.3 Possibility of hazardous reactions Hazardous reactions : No dangerous reaction known under conditions of normal use. 10.4 Conditions to avoid Conditions to avoid : No conditions to be specially mentioned. 10.5 Incompatible materials Materials to avoid : No materials to be especially mentioned. 10.6 Hazardous decomposition products No decomposition if stored and applied as directed. SECTION 11: Toxicological information 11.1 Information on toxicological effects Acute toxicity Product: Acute oral toxicity : Remarks: This information is not available. Acute inhalation toxicity : Remarks: This information is not available. Acute dermal toxicity : Remarks: This information is not available. Skin corrosion/irritation Product: Remarks : This information is not available. Serious eye damage/eye irritation