Note: Ingredients listed on restricted chemical lists
General Information
Revision date
2022-06-23
Product name
Kingspan KoolDuct Liner System
1.2.1 Relevant identified uses
Fabrication into pre-insulated HVAC ductwork operating within the internal air temperature range of -26°C to +85°C / -15°F to 185°F
1.2.2. Uses advised against
Not for use in fire rated ductwork applications. Not for consumption
supplier name
Kingspan Insulation LLC
Emergency telephone
1-800-241-4402
Icons in SDS
Company Information
company name
Kingspan Insulation LLC
e-mail address of the competent person responsible for the Safety Data Sheet
info@kingspaninsulation.us
Section 2
2.1 Classification of the substance or mixture
Combustible dust
Hazard pictograms
none
Hazard statements
May form combustible dust concentrations in air
Precautionary statements
None
2.3 Other hazards
Not applicable
Other hazards which do not result in classification
Overview No unusual hazards are expected under conditions of normal use, provided the appropriate engineering controls and safe working practices, as recommended by Kingspan insulation Ltd, are implemented (see Sections 7 & 8). Grinding, crushing and severe mechanical processing of the product, all of which are considered conditions of non-normal use, may result in the generation of some nuisance dusts. Ignition of airborne nuisance dust that has been allowed to accumulate to combustible concentrations suspended in air in a confined space may cause explosion. This SDS also includes for such circumstances Health Exposure to high concentrations of dust may give rise to mechanical irritation of eyes, skin, nose or throat. Exposure of eyes and skin to UV light and heat reflected from the foil facings of the product, in bright or sunny weather conditions, may result in radiation burns. Physical When wet, the foil facings of the product may be slippery underfoot. The weight of the load imposed by multiple units of the product may give rise to physical injury if handled concurrently without assistance. Fire Grinding, crushing or severe mechanical processing of the product may result in: the excessive release of residual blowing agent gases, which may accumulate to ignitable concentrations in confined and / or unventilated spaces; and the generation of nuisance dust, which may accumulate to form combustible concentrations in air.
