Note: Ingredients listed on restricted chemical lists
EC/CAS
25068-38-6
Name of the chemical
4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane
Concentration
40-70%
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
20-40%
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
1-5%
General Information
Revision date
2020-01-17
Product name
Sakrete High Strength Anchoring Epoxy
1.2.1 Relevant identified uses
Anchoring and bonding applications. Grouting dowels bars for concrete repairs. Filling holes, pits and cracks
Manufacturer Name
King Packaged Materials Company
Emergency telephone
(800) 424-9300
Icons in SDS
Company Information
company name
King Packaged Materials Company
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H315, H320
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
Classification Skin irritation - Category 2; Eye irritation - Category 2B; Carcinogenicity - Category 2
2.2 Label elements
Warning
Hazard statements
Causes skin irritation. Causes eye irritation.
Prevention
Do not handle until all safety precautions have been read and understood. Wash hands and skin thoroughly after handling. Wear protective gloves/protective clothing/eye protection/face protection. Avoid breathing dust/fume/gas/mist/vapours/spray. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. This product contains crystalline silica (quartz sand). IARC has classified crystalline silica as a Group 1 carcinogen. Both IARC and NTP consider silica as a known human carcinogen. Evidence is based on the chronic and long-term exposure workers have had to respirable crystalline silica dust particles. Because this product is in liquid or paste form, it does not pose a dust hazard therefore, this classification is not relevant. (Note Sanding of this product will create a possible silica dust hazard). This product contains titanium dioxide which IARC has classified as a Group 2B carcinogen (possibly carcinogenic to humans). Both IARC and NTP consider silica as a known human carcinogen. Evidence is based on sufficient animal testing as a result as a result of long-term inhalation at high concentrations of respirable amounts of titanium dioxide. Because this product is in liquid or paste form, it does not pose a dust hazard: therefore, this classification is not relevant. (Note: Sanding of this product will create a possible dust hazard).
Product definition
Sakrete High Strength Anchoring Epoxy - Ver. 1 SDS No.: 0347 Date of preparation January 17, 2020 Date of Last Revision: January 17, 2020 Page 01 of
2.1 Classification of the substance or mixture
Skin irritation - Category 2; Eye irritation - Category 2B; Carcinogenicity - Category 2
